Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

Design of High Temperature Brushless Dc Motor System for Oil Well Detecting

Design of a High Temperature Brushless DC Motor Drive and Control Circuit for Oil Well Detecting

High Temperature Brushless DC Motor System and Its Operation Mode Control

Thermal analysis of a fluid immersed brushless DC motor for aerospace applications

Design and Friction Loss Study of Full-Ocean Depth Oil-Filled Direct Current Motor

A Brushless DC motor design for an aircraft electro-hydraulic actuation system

Design of Drive System for Sensorless Brushless DC Motor Based on Model Reference Adaptive Control and Its Application in Horizontal Well Tractor

A Low Power High Temperature Brushless DC Motor Driver

Design of direct-drive air compressor drived by permanent magnet brushless DC motor

Design and electromagnetic analysis of oil-cooled structure of new hairpin-winding motors for automobiles

Effect of Low Temperature and High Pressure on Deep-Sea Oil-Filled Brushless Dc Motors

Design of Deep Sea Oil-Filled Brushless DC Motors Considering the High Pressure Effect

Research on Permanent Magnet Synchronous Motor Driver System of Horizontal Well Tractor

A New Strategy for BLDC Sensorless Control System and Its Application in Horizontal Well Tractor

Design And Analysis Of A Switched Reluctance Motor With High Temperature Superconducting Windings

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Analysis and Control of Multiphase Permanent-Magnet Bearingless Motor With a Single Set of Half-Coiled Winding

A High Torque Density Permanent Magnet Motor for Oil Pumping Unit

Thermal Analysis of Underwater Oil-Filled BLDC Motor

Research Of Control System Of Linear Electromagnetic Oil-Pumping Unit Based On Dsp