Abstract:This paper presents the architecture of an asynchronous array of simple processors (AsAP), and evaluates its key architectural features as well as its performance and energy efficiency. The AsAP processor calculates DSP applications with high energy-efficiency, is capable of high-performance, is easily scalable, and is well-suited to future fabrication technologies. It is composed of a two-dimensional array of simple single-issue programmable processors interconnected by a reconfigurable mesh network. Processors are designed to capture the kernels of many DSP algorithms with very little additional overhead. Each processor contains its own tunable and haltable clock oscillator, and processors operate completely asynchronously with respect to each other in a globally asynchronous locally synchronous (GALS) fashion. A 6×6 AsAP array has been designed and fabricated in a 0.18 μm CMOS technology. Each processor occupies 0.66 mm2, is fully functional at a clock rate of 520–540 MHz at 1.8 V, and dissipates an average of 35 mW per processor at 520 MHz under typical conditions while executing applications such as a JPEG encoder core and a complete IEEE 802.11a/g wireless LAN baseband transmitter. Most processors operate at over 600 MHz at 2.0 V. Processors dissipate 2.4 mW at 116 MHz and 0.9 V. A single AsAP processor occupies 4% or less area than a single processing element in other multi-processor chips. Compared to several RISC processors (single issue MIPS and ARM), AsAP achieves performance 27–275 times greater, energy efficiency 96–215 times greater, while using far less area. Compared to the TI C62x high-end DSP processor, AsAP achieves performance 0.8–9.6 times greater, energy efficiency 10–75 times greater, with an area 7–19 times smaller. Compared to ASIC implementations, AsAP achieves performance within a factor of 2–5, energy efficiency within a factor of 3–50, with area within a factor of 2.5–3. These data are for varying numbers of AsAP processors per benchmark.

An Asynchronous Array of Simple Processors for Dsp Applications

AsAP: an Asynchronous Array of Simple Processors

High Performance and Energy Efficient Many-core DSP Systems: An Asynchronous Array of Simple Processors

Architecture and Evaluation of an Asynchronous Array of Simple Processors

AsAP: A Fine-Grained Many-Core Platform for DSP Applications

A 167-Processor 65 Nm Computational Platform with Per-Processor Dynamic Supply Voltage and Dynamic Clock Frequency Scaling

Simd Massively Parallel Processing System For Real-Time Image Processing

A Shared Memory Module for Asynchronous Arrays of Processors

A 167-Processor Computational Array for Highly-Efficient DSP and Embedded Application Processing

Hardware and Applications of AsAP: an Asynchronous Array of Simple Processors.

YHFT-QDSP: High-Performance Heterogeneous Multi-Core DSP

A 167-Processor Computational Platform in 65 Nm CMOS

CmDSP: A configurable media DSP

Design and Chip Implementation of a Heterogeneous Multi-Core DSP

A 28nm 386.5GOPS/W Coarse-Grained DSP Using Configurable Processing Elements for Always-on Computation with FPGA Implementation

A 61 Μa/mhz Reconfigurable Application-Specific Processor and System-on-chip for Internet-of-Things

A reconfigurable analog processor using coarse-grained, heterogeneous configurable analog blocks for field programmable mixed-signal processing

A 65nm 39GOPS/W 24-Core Processor with 11tb/s/w Packet-Controlled Circuit-Switched Double-Layer Network-on-chip and Heterogeneous Execution Array

Design of a Programmable Application Specific Processor for Speech Compression

An application-specific low power speech processor for cochlear implants

Design Of A Dynamic Reconfigurable Coprocessor For Flexible Precision Matrix Algorithms In Media Processing And Industrial Control Applications