Abstract:Helmholtz coils have extensive applications in biological medicine, aerospace, and other industries depending on the simple structure and miraculous magnetic field characteristics. However, the uniform zone generated by them is not appropriate for scientific experiments with large devices. Due to the limitations of Helmholtz coils in application, a novel design technique is proposed to improve the homogeneity and region of magnetic field. The main approach is to add an auxiliary coil on each side of Helmholtz coils to compensate for the magnetic field that exists farther out from the center point. To analyze the size relationship between the auxiliary coil and the main coil to obtain the best magnetic field distribution, the traditional Maclaurin expansion method and particle swarm optimization (PSO) algorithm are used to research and discuss. The magnetic field distribution and the corresponding effective coverage rate (ECR) of the improved schemes with different structural parameters are calculated under the relative deviations of 0.1%, 0.5% and 1%, respectively. The results obtained by the above optimization methods are verified by the finite element software COMSOL and specific experiments. Both optimization methods manifest that the maximum effective coverage rate can be achieved when the size of the auxiliary coil is consistent with that of the main coil. In addition, we compare the improved four-coil structure proposed in this paper with the existing four-coil square structure under the same volume. The data show that the improved structure has certain advantages in the spatial magnetic field distribution. The corresponding tri-axial coil system is established by adopting the parameters on the single axis, which can achieve a constant magnetic field in arbitrary directions by controlling the magnitude and direction of current on each axis. This provides a theoretical basis for the application of magnetic navigation technology.

A new arc-suppression coil with magnetic bias and its characteristics analysis

Magnet circuit design and optimization of giant magnetostrictive transducer

Closed-Double-Magnetic Circuit for A Long-Stroke Horizontal Electromagnetic Vibration Exciter

A Continuously Magnetic Valve Arc-Suppression Coil and Its Modeling

A Coil Structure Optimal Method Based On Vertical Coupling For Inductive Power Transfer

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

Modelling of AC loss in coils made of thin tapes under DC bias current

The active magnetic compensation coil

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

Design of Superconducting Shim Coils for an Open Bipanar Mri System Using Ibem

Improved Design of Automatic Tuning Arc Suppression Coil with Thyristor Series Capacitors

Comparative Study of Novel Doubly-Fed Linear Switched Flux Permanent Magnet Machines with Different Primary Structures

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

A magnetic-mechanical strong coupling FEM model and vibration characteristic analysis of transformer core under DC bias

Novel Adjustable TSC Arc Suppressing Coil

Semi-core Variable Inductor Based on DC Excitation Field

Study on the Coil Design of the Reusable Linear Magnetic Flux Compressor

Design of improved four-coil structure with high uniformity and effective coverage rate

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

Numerical study on the transport current distribution in the multi-layer CORC coil