Graphene Morphology Modulated by Nanowires Patterned on a Substrate Surface

Li, Teng,Zhang, Zhao

DOI: https://doi.org/10.1109/ISDRS.2009.5378140

2009-01-01

Abstract:In summary, we quantitatively determine the graphene morphology modulated by patterned nanowires on a substrate surface. Interestingly, we identify a snap-through instability of modulated graphene morphology.

What problem does this paper attempt to address?

Graphene With Patterned Fluorination: Morphology Modulation And Implications

Haifei Zhan,Guiyong Zhang,John M. Bell,Yuantong Gu

DOI: https://doi.org/10.1021/acs.jpcc.5b09533

2015-01-01

Abstract:Recent years have witnessed a large volume of works on the modification of graphene; however, an understanding of the associated morphology or mechanical properties changes is still lacking, which is vital for its engineering implementation. By taking the C4F fluorination as an example, we find that the morphology of both graphene sheet (GS) and graphene nanoribbon (GNR) can be effectively tailored by fluorination patterning via molecular dynamics simulations. The fluorine atom produces out-of-plane forces which trigger several intriguing morphology changes to monolayer graphene, including zigzag, folded, ruffle, nanoscroll, and chain structures. Notably, for multilayer GNR, the delamination and climbing phenomena of the surface layer are observed. Further studies show that the fluorination pattern can also be utilized to modulate the mechanical properties of graphene, e.g., about 40% increase of the effective yield strain is observed for the examined GNR with fluorination patterns. This study not only demonstrates the significant impacts on the morphology of graphene from fluorination but also suggests an effective avenue to tailor the morphology and thus mechanical properties of GS and GNR.
Graphene morphology regulated by nanowires patterned in parallel on a substrate surface

Zhao Zhang,Teng Li

DOI: https://doi.org/10.1063/1.3427551

2011-11-19

Abstract:The graphene morphology regulated by nanowires patterned in parallel on a substrate surface is quantitatively determined using energy minimization. The regulated graphene morphology is shown to be governed by the nanowire diameter, the nanowire spacing and the interfacial bonding energies between the graphene and the underlying nanowires and substrate. We demonstrate two representative regulated graphene morphologies and determine critical values of the nanowire spacing, nanowire diameter and interfacial bonding energies at which graphene switches between the two representative morphologies. Interestingly, we identify a rule-of-thumb formula that correlates the critical nanowire spacing, the critical interfacial bonding energies and the nanowire diameter in quite well agreement with the full-scale simulation results. Results from the present study offer guidelines in nano-structural design to achieve desired graphene morphology via regulation with a resolution approaching the atomic feature size of graphene.

Materials Science,Mesoscale and Nanoscale Physics
Snap-through instability of graphene on substrates

Teng Li,Zhao Zhang

DOI: https://doi.org/10.1007/s11671-009-9460-1

2009-07-20

Abstract:We determine the graphene morphology regulated by substrates with herringbone and checkerboard surface corrugations. As the graphene/substrate interfacial bonding energy and the substrate surface roughness vary, the graphene morphology snaps between two distinct states: 1) closely conforming to the substrate and 2) remaining nearly flat on the substrate. Such a snapthrough instability of graphene can potentially lead to desirable electronic properties to enable graphene-based devices.

Mesoscale and Nanoscale Physics,Materials Science
Wrinkling Instability of Graphene on Substrate-Supported Nanoparticles

Shuze Zhu,Teng Li

DOI: https://doi.org/10.1115/1.4026638

2014-01-01

Journal of Applied Mechanics

Abstract:Wrinkles in graphene with desirable morphology have practical significance for electronic applications. Here we carry out a systematic molecular dynamics study of the wrinkling instability of graphene on substrate-supported nanoparticles (NPs). At a large NP dispersion distance, a monolayer graphene adheres to the substrate and bulges out locally to wrap around individual NPs, forming isolated dome-shaped protrusions. At a small NP dispersion distance, tunneling wrinkles form in graphene to bridge the NP-induced protrusions. A critical NP dispersion distance for the onset of tunneling wrinkle instability of graphene is determined as a function of the NP size. The prediction from the modeling study agrees well with recent experimental observations. Results from the present study offer further insights into the formation of desirable wrinkles in graphene deposited on a substrate with engineered protrusions and, thus, can potentially enable novel design of graphene-based electronics.
Mechanics of nanoscale wrinkling of graphene on a non-developable surface

Yanguang Zhou,Yuli Chen,Bin Liu,Shengtao Wang,Zhenyu Yang,Ming Hu

DOI: https://doi.org/10.1016/j.carbon.2014.11.055

IF: 10.9

2015-01-01

Carbon

Abstract:As a two-dimensional crystal, the graphene sheet is often used with substrate materials because the freestanding graphene tends to corrugate and can hardly display its extraordinary properties in devices. However, the substrate is rarely perfectly-flat, but has microscopic roughness. Whether or not the graphene sheet can conform fully to a substrate with nano- and micro-roughness is essential for the performance of the graphene-based devices. In this paper, a theoretical model is developed to predict the morphology of a monolayer graphene sheet attaching to the substrate with microscopic non-developable roughness by an energy-based analysis. The final graphene morphology is revealed to result from the competition between two energy terms: the adhesion energy between graphene and substrate, and the strain energy stored in the graphene due to the deformations. Thus, by accounting for these two parts of energy, the critical condition to predict the morphology conversion from full conformation to wrinkling is established, which agrees well with the results of molecular dynamics simulations. This study has significant meanings for design and fabrication of high quality nanostructured coatings on substrates with complex surfaces, and can offer a guide for designing new functional graphene electronical devices such as nano-sensors and nano-switches as well.
Nanoscale Morphology Of Graphene On Different Substrates

M. Lanza,Y. Wang,H. Duan,T. Gao,Z. Liu,Y. Zhang,M. Porti,M. Nafria,A. Bayerl,X. Aymerich,H. Liang,G. Jing

DOI: https://doi.org/10.1109/CDE.2013.6481394

2013-01-01

Abstract:Graphene layers can be used as the conductive channel in metal oxide semiconductor field effect transistors, metallic electrodes in capacitors, etc. However, when graphene is grown by chemical vapor deposition (CVD), substrate-induced corrugations and strain-related wrinkles formed on the graphene layer impoverish the properties of these devices by lowering the conductance and increasing their variability. In this work, different nanoscale experimental techniques have been used to investigate the morphology of as-grown and transferred graphene sheets on different substrates. We show that while the compressive strain (from the growth process) in the graphene sheet on flat substrates is minimized by generating wrinkles, on rough substrates it can be minimized by improving the graphene-substrate adhesion, leading to lower densities of wrinkles. This method allows the design of wrinkle-free graphene based devices.
A Molecular Mechanics Study of Morphologic Interaction Between Graphene and Si Nanowires on a SiO2 Substrate

Zhao Zhang,Teng Li

DOI: https://doi.org/10.1155/2011/374018

IF: 3.791

2011-01-01

Journal of Nanomaterials

Abstract:We study the morphologic interaction between graphene and Si nanowires on a SiO2 substrate, using molecular mechanics simulations. Two cases are considered: (1) a graphene nanoribbon intercalated by a single Si nanowire on a SiO2 substrate and (2) a blanket graphene flake intercalated by an array of Si nanowires evenly patterned in parallel on a SiO2 substrate. Various graphene morphologies emerge from the simulation results of these two cases, which are shown to depend on both geometric parameters (e.g., graphene nanoribbon width, nanowire diameter, and nanowire spacing) and material properties (e.g., graphene-nanowire and graphene-substrate bonding strength). While the quantitative results at the atomistic resolution in this study can be further used to determine the change of electronic properties of graphene under morphologic regulation, the qualitative understandings from this study can be extended to help exploring graphene morphology in other material systems.
Tuning Graphene Morphology by Substrate Towards Wrinkle-Free Devices: Experiment and Simulation

M. Lanza,Y. Wang,A. Bayerl,T. Gao,M. Porti,M. Nafria,H. Liang,G. Jing,Z. Liu,Y. Zhang,Y. Tong,H. Duan

DOI: https://doi.org/10.1063/1.4794521

IF: 2.877

2013-01-01

Journal of Applied Physics

Abstract:Graphene grown by chemical vapor deposition can be used as the conductive channel in metal oxide semiconductor field effect transistors, metallic electrodes in capacitors, etc. However, substrate-induced corrugations and strain-related wrinkles formed on the graphene layer impoverish the properties of these devices by lowering the conductance and increasing their variability. Using the scanning electron microscopy, Auger electron spectroscopy, scanning tunneling microscopy, and atomic force microscopy, we investigated the morphology of as-grown and transferred graphene sheets on different substrates. We show that while the compressive strain (from the growth process) in the graphene sheet on flat substrates is minimized by generating wrinkles, and on rough substrates, it can be minimized by improving the graphene-substrate adhesion, leading to lower densities of wrinkles. This method paves the way to the design of wrinkle-free graphene based devices.
Effects of mismatch strain and substrate surface corrugation on morphology of supported monolayer graphene

Zachary H. Aitken,Rui Huang

DOI: https://doi.org/10.1063/1.3437642

IF: 2.877

2010-06-15

Journal of Applied Physics

Abstract:Graphene monolayers supported on oxide substrates have been demonstrated with superior charge mobility and thermal transport for potential device applications. Morphological corrugation can strongly influence the transport properties of the supported graphene. In this paper, we theoretically analyze the morphological stability of a graphene monolayer on an oxide substrate, subject to van der Waals interactions and in-plane mismatch strains. First, we define the equilibrium separation and the interfacial adhesion energy as the two key parameters that characterize the van der Waals interaction between a flat monolayer and a flat substrate surface. By a perturbation analysis, a critical compressive mismatch strain is predicted, beyond which the graphene monolayer undergoes strain-induced instability, forming corrugations with increasing amplitude and decreasing wavelength on a perfectly flat surface. When the substrate surface is not perfectly flat, the morphology of graphene depends on both the amplitude and the wavelength of surface corrugation. A transition from conformal (corrugated) to nonconformal (flat) morphology is predicted. The effects of substrate surface corrugation on the equilibrium mean thickness of the supported graphene and the interfacial adhesion energy are analyzed. Furthermore, by considering both the substrate surface corrugation and the mismatch strain, it is found that, while a tensile mismatch strain reduces the corrugation amplitude of graphene, a corrugated substrate surface promotes strain-induced instability under a compressive strain. These theoretical results suggest possible means to control the morphology of supported graphene monolayers by substrate surface patterning and strain engineering.

physics, applied
Nanosleeves: Morphology Transitions of Infilled Carbon Nanotubes

Mingda Ding,Fan Xu,Ting Wang,Chenbo Fu

DOI: https://doi.org/10.1016/j.jmps.2021.104398

2021-01-01

Abstract:Morphology instability of substrate-supported carbon atomic layers can be harnessed to modulate physical properties and functions, which has drawn interesting attention. Curvature would be a critical factor affecting surface morphology and its stability characteristics. Infilled carbon nanotubes, that is to say carbon monolayers with curved geometry and infilled substrates, namely nanosleeves, widely exist in the literature and have many potential applications. Here, we reveal an unprecedented rich post-buckling phenomenon of nanosleeves, which involves multiple successive bifurcations: smooth-wrinkle-ridge-sagging transitions. The nanosleeve initially buckles into periodic axisymmetric wrinkles at the threshold and then evolves into a localized mode with one single ridge growing upon further axial compression. Finally, the amplitude of the ridge reaches a limit and the symmetry is broken with the ridge sagging into a recumbent fold that can be axisymmetric or non-axisymmetric. Such rich morphology transition is first revealed by molecular dynamics simulation, and then theoretically predicted by a finite strain core–shell continuum model. An analytical solution of the critical threshold of primary smooth-wrinkle transition is further provided, which explicitly indicates the crucial role played by curvature and van der Waals interaction between the carbon monolayers and infilled metals. Such multiple-bifurcation scenario and curvature-determined mechanism are found to be inherently universal.
Molecular Dynamics Simulations of the Morphology Transformations in Unzipped Carbon Nanotubes

Jiafang Xu,Yingnan Zhang,Tao Wang,Xin Zheng,Wen Li,Zihan Dong,Wensen Wang

DOI: https://doi.org/10.1016/j.cplett.2016.06.029

IF: 2.719

2016-01-01

Chemical Physics Letters

Abstract:Tuning the assembly of carbon nanomaterials to obtain a kaleidoscope of carbon nanostructures is very important and challenging for the development of nanotechnology. Using molecular dynamics simulations method, we studied the morphology transformations of unzipped CNTs with different unzipping patterns. By modulating the unzipping patterns, the CNTs could self-assemble forming graphene nanoribbons and carbon nanoscrolls. From the energy analyzation, we find that the van der Waals interactions are responsible for the assembly of the unzipped CNTs. This unusual self-assembling method for CNTs could provide clues for further studies on the design of novel nanostructures.
Scanning Tunneling Microscope Observations of Non-Ab Stacking of Graphene on Ni Films

Ruiqi Zhao,Yanfeng Zhang,Teng Gao,Yabo Gao,Nan Liu,Lei Fu,Zhongfan Liu

DOI: https://doi.org/10.1007/s12274-011-0127-8

2011-01-01

Abstract:Microscopic features of graphene segregated on Ni films prior to chemical transfer—including atomic structures of monolayers and bilayers, Moiré patterns due to non-AB stacking, as well as wrinkles and ripples caused by strain effects-have been characterized in detail by high-resolution scanning tunneling microscopy (STM). We found that the stacking geometry of the bilayer graphene usually deviates from the traditional Bernal stacking (or so-called AB stacking), resulting in the formation of a variety of Moiré patterns. The relative rotations inside the bilayer were then qualitatively deduced from the relationship between Moiré patterns and carbon lattices. Moreover, we found that typical defects such as wrinkles and ripples tend to evolve around multi-step boundaries of Ni, thus reflecting strong perturbations from substrate corrugations. These investigations of the morphology and the mechanism of formation of wrinkles and ripples are fundamental topics in graphene research. This work is expected to contribute to the exploration of electronic and transport properties of wrinkles and ripples. Open image in new window
Substrate-Induced Graphene Chemistry for 2d Superlattices with Tunable Periodicities

Lin Zhou,Lei Liao,Jinying Wang,Jingwen Yu,Denghua Li,Qin Xie,Zhirong Liu,Yanlian Yang,Xuefeng Guo,Zhongfan Liu

DOI: https://doi.org/10.1002/adma.201505360

IF: 29.4

2015-01-01

Advanced Materials

Abstract:2D graphene superlattices are fabricated down to the nanometer scale by a universal substrate-engineering approach, based on substrate-induced site-selective chemical reactions on the graphene basal plane. Various 2D graphene superlattices with tunable periodicities and chemical functionalities are made by using SiO2 nanosphere assemblies and other nanostructured substrates.
Moiré Superlattice-Level Stick-Slip Instability Originated from Geometrically Corrugated Graphene on a Strongly Interacting Substrate

Ruoyu Shi,Lei Gao,Hongliang Lu,Qunyang Li,Tian-Bao Ma,Hui Guo,Shixuan Du,Xi-Qiao Feng,Shuai Zhang,Yanmin Liu,Peng Cheng,Yuan-Zhong Hu,Hong-Jun Gao,Jianbin Luo

DOI: https://doi.org/10.1088/2053-1583/aa6da2

IF: 6.861

2017-01-01

2D Materials

Abstract:Two dimensional (2D) materials often exhibit novel properties due to various coupling effects with their supporting substrates. Here, using friction force microscopy (FFM), we report an unusual moire superlattice-level stick-slip instability on monolayer graphene epitaxially grown on Ru(0001) substrate. Instead of smooth friction modulation, a significant long-range stick-slip sawtooth modulation emerges with a period coinciding with the moire superlattice structure, which is robust against high external loads and leads to an additional channel of energy dissipation. In contrast, the long-range stick-slip instability reduces to smooth friction modulation on graphene/Ir(111) substrate. The moire superlattice-level slip instability could be attributed to the large sliding energy barrier, which arises from the morphological corrugation of graphene on Ru(0001) surface as indicated by density functional theory (DFT) calculations. The locally steep humps acting as obstacles opposing the tip sliding, originates from the strong interfacial electronic interaction between graphene and Ru(0 0 0 1). This study opens an avenue for modulating friction by tuning the interfacial atomic interaction between 2D materials and their substrates.
Tight-binding Calculation of Growth Mechanism of Graphene on Ni(111) Surface

Chen Zhou,Jing Hu,Yuan Tian,Qian-Ying Zhao,Ling Miu,Jian-Jun Jiang

DOI: https://doi.org/10.4208/jams.101411.111611a

2012-01-01

The Journal of Atomic and Molecular Sciences

Abstract:The nucleation of graphene on Ni surface, as well as on the step, is studied using a tight binding method of SCC-DFTB. The result demonstrates that the fcc configuration has the lowest total energy and thus is the most stable one compared to the other two structures when benzene ring is absorbed on the Ni(111) surface. The activity of marginal growth graphene's carbon atoms decreases from the boundary to the center, when they are absorbed on the substrate. Graphene layer can grow continuously on step surface formed by intersection of Ni(111) and Ni(1-11) surface. Meanwhile, a mismatch will occur between the layer and Ni surface and thus leads to flaws when the layer grows larger. Reducing the mismatch between the graphene and the step surface will benefit the growth of graphene of large area and high quality.
Morphology and Performance of Graphene Layers on As-Grown and Transferred Substrates

Mario Lanza,Yan Wang,Hui Sun,Yuzhen Tong,Huiling Duan

DOI: https://doi.org/10.1007/s00707-013-1053-5

IF: 2.645

2014-01-01

Acta Mechanica

Abstract:Graphene's excellent physical, electrical, mechanical and passivating properties are revolutionizing the world of nanotechnology. In its beginning, graphene was only used as the conductive channel in metal-oxide-semiconductor field-effect transistors and as metallic electrode in capacitors, but the development of chemical vapor deposited graphene on metal catalysts, together with an ingenious process to transfer it to arbitrary substrates extended the use of graphene to many other applications. The main problem of this methodology is to get a good adhesion between the graphene and the target substrate that ensures both protection and interaction. In this paper, we analyze the capability of graphene to adapt to underlying simple and complex substrates. We observe the important adhesion differences depending on the graphene thickness and the target substrate roughness. We take advantage of graphene coatings to protect different materials from high current densities, mechanical frictions and oxidation. The findings and prototypes here designed may open the way to extend the use of graphene as protective coating.
Morphology Instability of Silicon Nitride Nanowires

Huatao Wang,Weiyou Yang,Zhipeng Xie,Yansong Wang,Feng Xing,Linan An

DOI: https://doi.org/10.1021/jp901938a

2009-01-01

The Journal of Physical Chemistry C

Abstract:We report that cylinder-shaped Si 3 N 4 nanowires are not stable and can gradually transform into nanobelts via surface diffusion during high-temperature annealing. We demonstrate that such instability is driven by the requirements for reducing overall surface energy. The resultant nanobelts have the same width-to-thickness ratio, suggesting a stable morphology. A model in terms of surface energy is proposed to explain the formation of such stable morphology, which agrees well with experimental results. Our result suggests that instability could be a limiting factor for high-temperature applications of ID nanostructures.
Strain engineered graphene using a nanostructured substrate: I Deformations

M. Neek-Amal,F. M. Peeters

DOI: https://doi.org/10.48550/arXiv.1204.6370

2012-04-28

Mesoscale and Nanoscale Physics

Abstract:Using atomistic simulations we investigate the morphological properties of graphene deposited on top of a nanostructured substrate. Sinusoidally corrugated surfaces, steps, elongated trenches, one dimensional and cubic barriers, spherical bubbles, Gaussian bump and Gaussian depression are considered as support structures for graphene. The graphene-substrate interaction is governed by van der Waals forces and the profile of the graphene layer is determined by minimizing the energy using molecular dynamics simulations. Based on the obtained optimum configurations, we found that: (i) for graphene placed over sinusoidally corrugated substrates with corrugation wave lengths longer than 2\,nm, the graphene sheet follows the substrate pattern while for supported graphene it is always suspended across the peaks of the substrate, (ii) the conformation of graphene to the substrate topography is enhanced when increasing the energy parameter in the van der Waals model, (iii) the adhesion of graphene into the trenches depends on the width of the trench and on graphene's orientation, i.e. in contrast to a small width (3 nm) nanoribbon with armchair edges, the one with zig-zag edges follows the substrate profile, (iv) atomic scale graphene follows a Gaussian bump substrate but not the substrate with a Gaussian depression, and (v) the adhesion energy due to van der Waals interaction varies in the range [0.1-0.4] J/m^2.
Observation of a snap-through instability in graphene

Scott Scharfenberg,Nikhita Mansukhani,Cesar Chialvo,Richard L. Weaver,Nadya Mason

DOI: https://doi.org/10.1063/1.3676059

IF: 4

2012-01-09

Applied Physics Letters

Abstract:We examine the competition between adhesive and bending energies for few-layer graphene (FLG) samples placed on microscale-corrugated metallic substrates. Using atomic force microscopy, we show that the graphene undergoes a sharp “snap-through” transition as a function of layer thickness, where the material transitions between conforming to the substrate and lying flat on top of the substrate. By utilizing the critical snap-through thickness in an elasticity model for the FLG’s bending, we extract a value for graphene-surface adhesion energy of 1.1 eV/nm2.

physics, applied
Structure and Electronic Transport in Graphene Wrinkles

Wenjuan Zhu,Tony Low,Vasili Perebeinos,Ageeth A. Bol,Yu Zhu,Hugen Yan,Jerry Tersoff,Phaedon Avouris

DOI: https://doi.org/10.1021/nl300563h

IF: 10.8

2012-01-01

Nano Letters

Abstract:Wrinkling is a ubiquitous phenomenon in two-dimensional membranes. In particular, in the large-scale growth of graphene on metallic substrates, high densities of wrinkles are commonly observed. Despite their prevalence and potential impact on large-scale graphene electronics, relatively little is known about their structural morphology and electronic properties. Surveying the graphene landscape using atomic force microscopy, we found that wrinkles reach a certain maximum height before folding over. Calculations of the energetics explain the morphological transition, and indicate that the tall ripples are collapsed into narrow standing wrinkles by van der Waals forces, analogous to large-diameter nanotubes. Quantum transport calculations show that conductance through these collapsed wrinkle structures is limited mainly by a density-of-states bottleneck and by interlayer tunneling across the collapsed bilayer region. Also through systematic measurements across large numbers of devices with wide folded wrinkles, we find a distinct anisotropy in their electrical resistivity, consistent with our transport simulations. These results highlight the coupling between morphology and electronic properties, which has important practical implications for large-scale high-speed graphene electronics.

Graphene Morphology Modulated by Nanowires Patterned on a Substrate Surface

Graphene With Patterned Fluorination: Morphology Modulation And Implications

Graphene morphology regulated by nanowires patterned in parallel on a substrate surface

Snap-through instability of graphene on substrates

Wrinkling Instability of Graphene on Substrate-Supported Nanoparticles

Mechanics of nanoscale wrinkling of graphene on a non-developable surface

Nanoscale Morphology Of Graphene On Different Substrates

A Molecular Mechanics Study of Morphologic Interaction Between Graphene and Si Nanowires on a SiO2 Substrate

Tuning Graphene Morphology by Substrate Towards Wrinkle-Free Devices: Experiment and Simulation

Effects of mismatch strain and substrate surface corrugation on morphology of supported monolayer graphene

Nanosleeves: Morphology Transitions of Infilled Carbon Nanotubes

Molecular Dynamics Simulations of the Morphology Transformations in Unzipped Carbon Nanotubes

Scanning Tunneling Microscope Observations of Non-Ab Stacking of Graphene on Ni Films

Substrate-Induced Graphene Chemistry for 2d Superlattices with Tunable Periodicities

Moiré Superlattice-Level Stick-Slip Instability Originated from Geometrically Corrugated Graphene on a Strongly Interacting Substrate

Tight-binding Calculation of Growth Mechanism of Graphene on Ni(111) Surface

Morphology and Performance of Graphene Layers on As-Grown and Transferred Substrates

Morphology Instability of Silicon Nitride Nanowires

Strain engineered graphene using a nanostructured substrate: I Deformations

Observation of a snap-through instability in graphene

Structure and Electronic Transport in Graphene Wrinkles