Abstract:The global transition to renewables in response to climate change has largely been supported by the expansion of wind power capacity and improvements in turbine technology. This is being made possible mainly due to improvements in the design of highly efficient turbines exceeding a 10 MW rated power. Apart from power efficiency, wind turbines must withstand the mechanical stress caused by wind–hydro conditions. Such comprehensive structural analysis has rarely been performed previously, especially for large-scale wind turbines under real environmental conditions. The present work analyzes the energy production and structural performance of an NREL-IEA 15 MW wind turbine using measured wind and hydro data. First of all, an optimum operating range is determined in terms of the wind speed and blade pitch angle to maximize the power coefficient. Then, at this optimum range, a detailed breakdown of the forces and moments acting on different components of the wind turbine is presented. It was found that wind speeds of 9 to 12 m/s are best suited for this wind turbine, as the power coefficient is at its maximum and the mechanical loads on all components are at a minimum. The loads are at a minimum due to the optimized blade pitch angle. The bending force on a monopile foundation (fixed on the seabed) is found to be at a maximum and corresponds to nearly 2000 kN. The maximum blade force is nearly 700 kN, whereas on the tower it is almost 250 kN. The maximum force on the tower occurs at a point which is found to be undersea, whereas above-sea, the maximum force on the tower is nearly 20% less than the undersea maximum force. Finally, seasonal and annual energy production is also estimated using locally measured wind conditions.

A Consideration on Loss Characteristics and Annual Capacity Factor of Offshore Wind Farm

A Derivation of Simulation Model of Offshore Wind Farm with Losses and Annual Capacity Factor Considered

A Study on the Economic Conditions of Wind Turbine Generation System with Doubly Fed Synchronous Generator

Output characteristic analysis and delivery line capacity exploration of large-scale offshore wind power

Efficiency calculation of wind turbine generation system with doubly-fed induction generator

Wind Turbine Performance Analysis of An Offshore Wind Farm in China

Research Status and Developing Prospect of Offshore Wind Farm With Pure DC Systems

Technical and Economic Analysis of Power Collection and Transmission Schemes Adapted to Large-scale Offshore Wind Farm

A Consideration on the Determination of Ratings of Energy Storage System for Smoothing Wind Generator Output

Energy Availability Analysis of Offshore Wind Farms Considering the Correlation between Wind Speed Cloud Model and Parameters

Analysis on Wind Turbine Degradation of the Shinan Wind Power Plant

A Consideration on the Determination of Power Rating of Energy Storage System for Smoothing Wind Generator Output

Investigation on the Integral Output Power Model of a Large-Scale Wind Farm

Investigating the Structural and Power Performance of a 15 MW Class Wind Energy Generation System under Experimental Wind and Marine Loading

Potential Output Capacity Estimation in Offshore Wind Farm Layout Optimization Considering Complex Marine Meteorological Environment

Power Fluctuation and Power Loss of Wind Turbines Due to Wind Shear and Tower Shadow

Analysis of Dynamic Response Characteristics for 5 MW Jacket-type Fixed Offshore Wind Turbine

A New Method for Analyzing Frequency and Voltage Fluctuations of Power System with Wind Generators Installed.

A Feasibility Study for Floating Offshore Windfarms in Japanese Waters

Study on reactive power configuration of offshore wind farms

The Study of Multi-Terminal DC Systems in an Offshore Wind Environment: A Focus on Cable Ripple Analysis