Abstract:In this paper, a new method named “Feldtkeller correction approach”(FCA) is proposed to correct impedance function (Z'n) during the circuit network synthesis process. With this method, the remaining Z'n is corrected after each element is extracted from Z'n, making it possible to ensure a successful synthesis. It is illustrated that a lossless low-pass network can be represented by certain polynomials constrained by Feldtkeller equation and a successful circuit synthesis can be continuous by updating the polynomial coefficients. Few examples are given to validate the proposed correction approach when it comes to the synthesis of the highest order impedance function. First, a 30th order Butterworth filter is implemented using FCA with a relative error of 1.0464 x 10 -7 . Then, S-parameter simulation based on the synthesis elements is performed and proved to be entirely consistent with theoretical values. To demonstrate the robustness of this method, several randomly generated impedance functions are tested and the average relative error of 100 generated 35th-order impedance functions is calculated to be 3.7567 × 10 -5 . Third, a 1-3 GHz transformer impedance function acquired by real frequency technique is successfully synthesized via FCA. Finally, an ultra-wideband power amplifier is also designed with the aid of FCA. These results demonstrate that the proposed approach can be used to successfully synthesize the impedance function lower than 36th order.

A Novel Approach to the Synthesis of Mixed Lumped and Distributed Lossy Networks

Distributed Matching Network Synthesis with Lossy Commensurate Lines

Computer-aided synthesis of lossy commensurate line network and its application

Lumped lossy circuit synthesis and its application in broad-band FET amplifier design in MMICs

Computer-aided Synthesis of Commensurate Line Network and Its Application in MMICs

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

Early‐stage Microfluidic Network Design Framework Using Graph Sparsificiation Based Optimisation

A New Approach to the Synthesis of Microwave Lossy Filters

A Novel Combined Equivalent Networks Analysis for Power and Ground Planes with Narrow Slots

Synthesis of nonreciprocal lossless two-port networks using coupling matrix techniques

TLM modeling of non-conformal interfaces between contrasting propagation media by modification of interface cells

Active Microwave Metamaterials Incorporating Ideal Gain Devices

Non‐fragile Mixed ℋ ∞ / L 2 − L ∞ Synchronisation Control for Complex Networks with Markov Jumping‐switching Topology under Unreliable Communication Links

Improved approach to low-loss and high-uniformity MMI devices

Lowpass Network Synthesis Using “feldtkeller Correction Approach”

Coupling Matrix Synthesis of Nonreciprocal Lossless Two-Port Networks using Gyrators and Inverters

Deep Learning Assisted End-to-End Synthesis of mm-Wave Passive Networks with 3D EM Structures: A Study on A Transformer-Based Matching Network

Generalised Direct Matrix Synthesis Approach for Lossless Filters

Synthesis and Design of Mixed Lumped and Distributed Low-Pass Filters/Low-Passing Impedance Transformers With Taylor Series

A Mathematical Basis for the Chaining of Lossy Interface Adapters

Loss compensation in Metamaterials through embedding of active transistor based negative differential resistance circuits