Abstract:A novel approach is proposed for the path tracking of a Wheeled Mobile Robot (WMR) in the presence of an unknown lateral slip. Much of the existing work has assumed pure rolling conditions between the wheel and ground. Under the pure rolling conditions, the wheels of a WMR are supposed to roll without slipping. Complex wheel-ground interactions, acceleration and steering system noise are the factors which cause WMR wheel slip. A basic research problem in this context is localization and slip estimation of WMR from a stream of noisy sensors data when the robot is moving on a slippery surface, or moving at a high speed. DecaWave based ranging system and Particle Filter (PF) are good candidates to estimate the location of WMR indoors and outdoors. Unfortunately, wheel-slip of WMR limits the ultimate performance that can be achieved by real-world implementation of the PF, because location estimation systems typically partially rely on the robot heading. A small error in the WMR heading leads to a large error in location estimation of the PF because of its cumulative nature. In order to enhance the tracking and localization performance of the PF in the environments where the main reason for an error in the PF location estimation is angular noise, two methods were used for heading estimation of the WMR (1): Reinforcement Learning (RL) and (2): Location-based Heading Estimation (LHE). Trilateration is applied to DecaWave based ranging system for calculating the probable location of WMR, this noisy location along with PF current mean is used to estimate the WMR heading by using the above two methods. Beside the WMR location calculation, DecaWave based ranging system is also used to update the PF weights. The localization and tracking performance of the PF is significantly improved through incorporating heading error in localization by applying RL and LHE. Desired trajectory information is then used to develop an algorithm for extracting the lateral slip along X- and Y-axis from the PF estimated position of the WMR, the lateral slip along X- and Y-axis is then used to take some corrective measures. Lateral slip information is also used to find the direction along which WMR has to move to get back along the desired trajectory. Simulation results show that our proposed LHE and RL heading estimation methods significantly improve the PF localization and tracking performance on a slippery surface in both indoor and outdoor environments. The simulation results also show that the accurate locations of WMR and desired path information are used to estimate and compensate the lateral slip.

A Method to Online Estimate Wheel'S Slippage for Planetary Rover

Wheel’s Slip Ratio and Sinkage Estimation for Planetary Rovers Moving on Deformable Terrain

Visual Traversability Analysis for Micro Planetary Rover

A Robust Localization, Slip Estimation, and Compensation System for WMR in the Indoor Environments

Angular velocity current statistical model based real-time celestial navigation for lunar rover

Modeling of slip rate-dependent traversability for path planning of wheeled mobile robot in sandy terrain

Quasi-Static Motion Simulation and Slip Prediction of Articulated Planetary Rovers Using a Kinematic Approach

State Analysis and Emergency Control of Planetary Rover with Faulty Drive Wheel

The sinkage characteristics and prediction of a planetary rover based on a similarity model experiment

Nonparametric Terrain Estimation for Planetary Rovers Based on Noncontact Rut Measurement

Proprioceptive Slip Detection for Planetary Rovers in Perceptually Degraded Extraterrestrial Environments

Non-Linear Observer For Slip Parameter Estimation Of Unmanned Wheeled Robots

Advance Simulation Method for Wheel-Terrain Interactions of Space Rovers: A Case Study on the UAE Rashid Rover

Current-Based Analysis and Validation of a Wheel–Soil Interaction Model for the Trafficability of a Planetary Rover

Potential of Applying the Geometry-Based Rover Slip Prediction Model Learned on the Earth to the Moon

Wheel-Terrain Contact Geometry Estimation and Interaction Analysis using Aside-wheel Camera over Deformable Terrains

A comprehensive wheel-terrain contact model for planetary exploration rover design optimization

Predict the Rover Mobility over Soft Terrain using Articulated Wheeled Bevameter

Model Predictive Control of a Novel Wheeled–Legged Planetary Rover for Trajectory Tracking

Simultaneous Control of Terrain Adaptation and Wheel Speed Allocation for a Planetary Rover With an Active Suspension System

Design methodology, synthesis, and control strategy of the high-speed planetary rover