Abstract:The SoC (System-on-Chip) design for the WSN (Wireless Sensor Networks) nodes is the most significant technology of modern WSN design. There are a large amount of nodes in a WSN system, the nodes are densely deployed either inside the environment or very close to it. Each node is equipped with a sensor, an ADC (Analog-to-Digital Converter), a MCU (Micro Controller Unit), a storage unit, a power management unit, and a RF (Radio-Frequency) transceiver, as shown in Fig. 1, so that it can sense, store, process, and communicate with other sensors using multi-hop packet transmissions. The basic specifications of WSN are reliability, accuracy, flexibility, expenses, the difficulty of development and power consumption. Because all the nodes are battery-powered, power consumption is the most important specification of WSN. The core part of a WSN node is the RF transceiver, which is used to realize the wireless communication among the nodes. For a common used commercial chip, the distribution of power consumption is shown in Fig. 2, where TX and RX represent the transmitting mode and receiving mode of the transceiver. We can see that the RF part consumes the most power. Besides, modern RF design is composed of so many subjects that it requires IC designers to have sufficient knowledge. As a result, the IC design of RF transceivers becomes the most challenging research topic in the WSN field. As the applications of WSN become more and more widespread, many companies have developed highly-integrated chips for RF transceivers. The main specifications of several commercial chips are shown in Table. 1. The common characters of these chips can be summarized into several aspects: 1)a low data rate, 2)low power consumption, 3)high sensitivity, 4)relatively low output power, and 5)a simple modulation scheme. There are several ways to achieve low power consumption in WSN: 1)reduce the radiated power by using ad-hoc networks and multi-hop communication, 2)optimize the trade-off between communication and local computing, 3)design more power-efficient RF transceivers, and 4)develop more energy-efficient protocols and routing algorithms. And the third one is what we will talk about in this chapter. 1

F5: Low-power radios for sensor networks

Power Sensor Networks by Wireless Energy — Current Status and Future Trends

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

Circuits and Systems for Wireless Sensing

Energy-Efficient Low-Power Circuit Techniques for Wireless Energy and Data Transfer in IoT Sensor Nodes

Energy-Efficient Scheme For Ieee 802.15.4 Compliant Device

Design Of Radio-Frequency Transceivers For Wireless Sensor Networks

Energy Efficient RF Front-Ends Architecture Design for Wireless Sensor Networks

The Designed of Low Power Wireless Sensor Network Node Based on CC2430

The design of low-power wireless sensor node

Optimizing the Battery Energy Efficiency in Wireless Sensor Networks

Energy Efficiency of the IEEE 802.15.4 Standard in Dense Wireless Microsensor Networks: Modeling and Improvement Perspectives

Performance Advancement of Wireless Sensor Networks using Low Power Techniques and Efficient Placement of Nodes

Design of Wireless Sensors for IoT with Energy Storage and Communication Channel Heterogeneity

Proof-of-Concept for an IoT Sensor Platform with 2.4ghz Wake-up Radio

Energy-Aware Sensor Node Design With Its Application in Wireless Sensor Networks

WULoRa: An energy efficient IoT end-node for energy harvesting and heterogeneous communication

Research on Energy Harvesting Mechanism and Low Power Technology in Wireless Sensor Networks

A survey of energy-efficient wireless communications

No-Sense: Sense with Dormant Sensors

Energy Efficient Control Scheme in Wireless Sensor Networks