3-D Printed Dual-band, Dual-Sense Circularly Polarized Dielectric Resonator Antenna with a Bandstop Filtering Response Using Planar Via-Free D-CRLH Feeding Network
Taotao Huang,Haiwen Liu,Hao Xu,Li Geng
DOI: https://doi.org/10.1016/j.aeue.2023.154760
IF: 3.169
2023-06-03
AEU - International Journal of Electronics and Communications
Abstract:A novel concept to design a dual-band, dual-sense circularly polarized (CP) antenna with a bandstop filtering response is presented by adopting an elaborate-designed irregular-shaped dielectric resonator (ISDR) and a dual-composite right/left-handed (D-CRLH)-based feeding network. First, the TE y 111 and TE y 113 modes of a rectangular DR (rDR) are simultaneously excited using an offset feeding slot, to realize the dual-band, linearly polarized (LP) operation in the x -direction. To eliminate the effects of the offset feeding on antenna performance, two types of edge-cuts and an impedance transformer are introduced. Secondly, another microstrip line and offset feeding slot are utilized to excite TE x 111 and TE x 113 modes of the DRA, obtaining dual-LP in two bands, and the corner truncation is introduced to reduce the cross-polarized field. Accordingly, a dual-band, dual-LP DRA with boresight radiation and low cross-polarization is achieved. After that, building on this design, a dual-band feeding network based on the D-CRLH resonator is employed to further implement the dual-sense CP operation. Finally, the ISDR is manufactured using 3-D printed technology for demonstration. The measured results show that the proposed antenna obtains a 3-dB axial ratio (AR) bandwidth of 9.3 % for the left-hand circular polarization (LHCP) at the lower band and 3.6 % for the right-hand circular polarization (RHCP) at the upper band. Moreover, the proposed antenna also features good suppression between two bands as the D-CRLH resonator offers a stopband filtering effect.
telecommunications,engineering, electrical & electronic