Abstract:Packaging materials have a great impact on the performance and reliability of light-emitting diodes (LEDs). In this study, we have prepared high performance LED devices through encapsulating LEDs by epoxy materials incorporated with filler powders. A set of evaluation methods have also been established to characterize the reliability of LED devices. No delamination or internal cracking between packaging materials and lead frames has been found for the encapsulated high performance LED devices after the package saturation with moisture and subsequent exposure to high-temperature solder reflow and thermal cycling. Four kinds of inorganic silica fillers, namely, quartz, fused silica, cristobalite, and spherical silica, and one kind of organic filler, that is, spherical silicone powder, were incorporated into the epoxy packaging materials to compare their effects on performance of LED devices. The properties of epoxy packaging materials and LED devices were studied by differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), dynamic mechanical analysis (DMA), thermomechanical analyzer (TMA), ultravioletvisible spectrophotometer (UV-vis), scanning acoustic microscopy (SAM), and scanning electron microscopy (SEM). Except the spherical silicone powder filled epoxy materials, all the other filled systems showed lower equilibrium water sorption content and smaller water diffusion coefficient in both water sorption and moisture sorption tests. The coefficient of thermal expansion (CTE) values were also decreased with the addition of fillers, and the systems filled with quartz, fused, and filled with spherical silica gave the best performance, which exhibited the reduced CTE values both below and above Tg. The results of TGA essentially showed no difference between filled and unfilled systems. The glass transition temperature changed little for all the filled systems, except the one incorporated with spherical silicone. The modulus at room temperature increased with the addition of fillers. The light transmittance of filled epoxy materials varied with fillers after UV and thermal aging.

Stretchable and Transparent Silicone/zinc Oxide Nanocomposite for Advanced LED Packaging

Largely Enhanced Efficiency In Zno Nanowire/P-Polymer Hybridized Inorganic/Organic Ultraviolet Light-Emitting Diode By Piezo-Phototronic Effect

Zno Quantum Dots-Filled Encapsulant for Led Packaging

High Refractive Index and Transparency Nanocomposites As Encapsulant for High Brightness Led Packaging

Highly Bright And Stable Electroluminescent Devices With Extraordinary Stretchability And Ultraconformability

Multifunctional silicone nanocomposites for advanced LED encapsulation

Transparent Dispensible High‐refractive Index ZrO2/epoxy Nanocomposites for LED Encapsulation

Ultra-high refractive index LED encapsulant

Flexible Light Emission Diode Arrays Made Of Transferred Si Microwires-Zno Nanofilm With Piezo-Phototronic Effect Enhanced Lighting

High-performance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials.

Multiaxial Wavy Top-Emission Organic Light-Emitting Diodes on Thermally Prestrained Elastomeric Substrates

Sulfur-Rich Ageing Mechanism of Silicone Encapsulant Used in LED Packaging: An Experimental and Molecular Dynamic Simulation Study

Waterproof Flexible InP@ZnSeS Quantum Dot Light‐Emitting Diode

Enhancing Light Emission of ZnO‐Nanofilm/Si‐Micropillar Heterostructure Arrays by Piezo‐Phototronic Effect

Synthesis of High Refractive Index Silicone LED Encapsulation with Ultra-High Hardness

Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package

Monolithic High-Index-Contrast Stretchable Photonics

Photoluminescence from Silicon Nanocrystals in Encapsulating Materials

Stretchable Organometal‐Halide‐Perovskite Quantum‐Dot Light‐Emitting Diodes

Novel Siloxane-Modified Epoxy Resins As Promising Encapsulant for LEDs.

Zirconia/phenylsiloxane nano-composite for LED encapsulation with high and stable light extraction efficiency