Abstract:The accumulation of fatigue damage in critical structural members of the aging aircrafts is an increasingly complex and continuing high priority problem. There is growing evidence that (i) multiple site damage or multiple element damage may compromise fail safety in older aircrafts, and (ii) significant fatigue damage, with subsequent formation of cracks, may occur at locations not considered in original fatigue failure evaluations. Thus, there is now a critical need for:(i) a wide area scanning technology capable of detecting microcrack clusters over wide areas of complex shaped components, with the objective of identifying potential problem areas; and (ii) a reliable permanently mounted monitoring tool for fatigue damage detection at identified fatigue critical locations, particularly at locations that are difficult to access for inspection. A new monitoring method called ICM (Intelligent Coating Monitoring), which is based mainly on the intelligent coating sensors has the capability to monitor crack initiation and growth in fatigue test coupons has been suggested in this study. The intelligent coating sensor is normally consisted of three layers: driving layer, sensing layer and protective layer where necessary. The sensing layer is made of conductive materials and the surface cracks in substrate can be represented by the variation of the resistance of the sensing layer. Fatigue tests with ICM on the surface inside a 8.00 mm hole in an TC4 tension-tension fatigue specimen, demonstrated the capability to detect cracks with l<300 mum, corresponding to the increment of the sensing layer's resistance at the level of 0.05 Omega. Also, ICM resistance measurements correlate with crack length, permitting crack length monitoring. Numerous applications are under evaluation for ICM in difficult-to-access locations on commercial and military aircrafts. The motivation for permanently flaw-detected coating monitoring is either (i) to replace an existing inspection that re- quires substantial disassembly and surface preparation (e.g. inside the fuel tank of an aircraft), or (ii) to take advantage of early detection and apply less invasive life-extension repairs, as well as reduce interruption of service when flaws are detected. Implementation of ICM is expected to improve fleet management practices and modify damage tolerance assumptions.

A Validation Study for a SHM Technology under Operational Environment

Flaw-detected Coating Sensors Applied in Aircraft R&M

The crack-detected coating sensor and its applications in R&M of aircrafts

The Flaw-Detected Coating and Its Applications in R&M of Aircrafts

Industrial application of a low-cost structural health monitoring system in large-scale airframe tests

Uniform Alternating Current Field Monitoring Sensor Array for Imaging and Quantitation of Cracks in Aluminum Alloy Structures

Towards a practical structural health monitoring technology for patched cracks in aircraft structure

The Protection and Accelerated Corrosion Test of Sensor of ICMS

A Review On Shm Techniques And Current Challenges For Characteristic Investigation Of Damage In Composite Material Components Of Aviation Industry

Application of Smart Coating Sensor in Crack Detection for Aircraft

Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications

Smart Coating Sensor Applied in Crack Detection for Aircraft

A Brief Review on Structural Health Monitoring Sensor Technology in Civil and Aviation Technology Applications

Structural Health Monitoring, In-service Experience, Benefit and Way Ahead

Research on Protection Technology of ICMS Sensor

Research on Structural Health Monitoring of Pressure Cabin Based on Stress Intensity Factor

Crack propagation monitoring in a full-scale aircraft fatigue test based on guided wave-Gaussian mixture model

Recent progress in aircraft smart skin for structural health monitoring

Structural Health Monitoring Cost Estimation of a Piezosensorized Aircraft Fuselage

Smart Sensors and Integrated Shm System for Offshore Structures

Experimental research of a structural health monitoring system concept based on fiber Bragg grating sensors on composite panels of an aircraft