Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Effect of Subatmospheric Pressure on Deposited Energy for Electrical Wire Explosion in Air

The Explosive Eletrical Characteristics Test Research on Electric Exploding Copper Wire

Effect of Deposition Energy on Underwater Electrical Wire Explosion

Behavior of exploding wires

Effect Of High-Voltage Electrode Geometry On Energy Deposition Into Exploding Wire In Vacuum

Study on Electrical Explosion of Bare and Insulation Coated Tungsten Wires

Study of the Relationship Between Maximum Specific Energy and Wire Diameter During Electrical Explosion of Tungsten Wires

Underwater electrical wire explosions under different discharge types: An experimental study with high initial energy storage

An Experimental Study on Flame Spread over Electrical Wire with High Conductivity Copper Core and Controlling Heat Transfer Mechanism under Sub-Atmospheric Pressures

Experimental Study on the Thermoplastic Dripping and Flame Spread Behaviors of Energized Electrical Wire under Reduced Atmospheric Pressure

Numerical Simulation of Energy Deposition Improvements in Electrical Wire Explosion Using A Parallel Wire

Measuring the Evolution of Mass Density Distribution of Wire Explosion

Molecular Dynamics Study of Liquid–vapor Transition in Underwater Electrical Wire Explosion

Electrothermal Instability in Different Modes of Underwater Electrical Wire Explosion

Underwater Electrical Wire Explosion: Shock Wave from Melting Being Overtaken by Shock Wave from Vaporization

Evolution of the Exploding Titanium Wire in 5-50 Kpa Ambient Gas

Study on the Evolution of Wire Explosion in Ambient Gas for Nano-powder Production

Unbalanced Distribution of Electric Current in Underwater Electrical Wire Array Explosion

Effect of oxygen concentration and external radiation on the thermal decomposition and combustion characteristics of electric wire

Research at Tsinghua University on electrical explosions of wires

High-Speed Imaging of Transition from Fluid Breakup to Phase Explosion in Electric Explosion of Tungsten Wires in Air