Abstract:This paper presents an anthropomorphic prosthetic hand, which has a thumb and four fingers, all the fingers of which are driven by servomotors built into the fingers and the palm. A novel flexible three-axis tactile sensor array have been investigated for their suitability to measure the grip forces exerted upon an object held by a prosthetic hand. The tactile sensor array are placed at the thumb of prosthetic hand with the capability of measuring both normal and shear force distribution using quantum tunneling composite (QTC) as a base material. A joystick-like mesa was attached to a sensor base to transfer external force, and there are four fan-shaped electrodes in a cell to decompose the contact force into normal and shear components. The sensor has been realized in a 2 × 6 array of unit sensors, and each unit sensor responds to normal and shear stresses in all three axes, respectively. The zero potential method is used to avoid crosstalk effect by setting all drive lines (row electrodes), which do not involve the measuring point at zero voltage and also by setting all output lines (column electrodes) at zero voltage. Measurement of a single sensor shows that the full-scale range of detectable force are about 10, 10 and 22 N for the x-, y- and z-directions, respectively. The sensitivities of a cell measured with a current setup are 0.47, 0.45 and 0.16 mV/mN for the x-, y- and z-directions, respectively. The sensor showed a high repeatability, low hysteresis, and min tactile cross-talk. The proposed flexible three-axial tactile sensor array can be applied in a curved or compliant surface that requires slip detection and flexibility, such as a prosthetic hand.

Fingertip Three-Axis Tactile Sensor for Multifingered Grasping

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

Multifingered Robot Hand Dynamic Grasping Control Based on Fingertip Three-Axis Tactile Sensor Feedback

Three-Axis Contact Force Measurement of A Flexible Tactile Sensor Array for Hand Grasping Applications

Development of a Flexible 3-D Tactile Sensor System for Anthropomorphic Artificial Hand

Flexible Tactile Sensor Array for Distributed Tactile Sensing and Slip Detection in Robotic Hand Grasping

A Flexible Tactile Sensor Array Based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

DEVELOPMENT AND EXPERIMENT ANALYSIS OF ANTHROPOMORPHIC PROSTHETIC HAND WITH FLEXIBLE THREE-AXIS TACTILE SENSOR

A Flexible Tactile Sensor Array Based On Pressure Conductive Rubber For Three-Axis Force And Slip Detection

Finger‐Skin‐Inspired Flexible Optical Sensor for Force Sensing and Slip Detection in Robotic Grasping

HumanFT: A Human-like Fingertip Multimodal Visuo-Tactile Sensor

A Fingertip Optical Fiber Composite Sensor with Conformal Design for Robotic Perception of Tactile Force

Development of Robotic Hand Tactile Sensing System for Distributed Contact Force Sensing in Robotic Dexterous Multimodal Grasping

FingerTac -- An Interchangeable and Wearable Tactile Sensor for the Fingertips of Human and Robot Hands

Flexible Capacitive Tactile Sensor Array with Truncated Pyramids As Dielectric Layer for Three-Axis Force Measurement

Development of Fully Flexible Tactile Pressure Sensor with Bilayer Interlaced Bumps for Robotic Grasping Applications.

A Solid-liquid Composite Flexible Bionic Three-axis Tactile Sensor for Dexterous Hands

A Novel Silicon Based Tactile Sensor On Elastic Steel Sheet For Prosthetic Hand