Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

Ultrasonic frequency's effect on the sensitivity and signal level in pressure measurement

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Ultrasonic Pressure Measurement in Pressure Vessels

Pressure Measurement Based on Multi-Waves Fusion Algorithm

Pressure Sensor Based on the Time-Interval Between Neighboring Longitudinal Waves

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Studies of a high-sensitive surface acoustic wave sensor for passive wireless blood pressure measurement

Effect of the Fixed Characteristics of Probe on the Detection Performance in the Non-Intrusive Pressure Measurement

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

A new method for nondestructively measuring pressure based on the Rayleigh wave

The Effects of Frequency-Dependent Amplitude Characteristic on Testing Resolution of Ultrasonic Guided Waves

Measuring the Effect of Excitation Signal Parameters on the Acoustic Intensity of Ultrahigh Frequency Ultrasound

Effects of diffraction on the sensitivity of needle‐type ultrasonic receivers

Ultrasonic Measurement of Stress Considering Strain Effect

Acoustic Field of Air-Coupled Ultrasonic Probe and Its Effect on Detection

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

The influence of temperature on the pressure sensitivity of surface acoustic wave pressure sensor

Influence Factors Analysis and Accuracy Improvement for Stress Measurement Using Ultrasonic Longitudinal Critically Refracted (LCR) Wave

Improved method for sound velocity measurement with frequency response under atmospheric pressure

A Non-Intrusive Pressure Sensor by Detecting Multiple Longitudinal Waves