Abstract:Strong front wall clutter has serious impacts on the target detection and imaging in the through-wall radar (TWR) system. A method of robust wall clutter suppression based on the entropy of an expanded antenna source for ultra-wideband through-wall radar is presented in this paper. The model of TWR scenario consists of four layers. Assume that the first and the third layers are air space, while the second and the fourth layers are composed of uniform flat concrete wall. The circular target, assumed to be a perfect electric conductor, is located in the third layer. Along the measurement line which is parallel to the front wall, the transceiver antenna scans uniformly. The echo signals that come from the target and walls are processed into discrete data at first, so that the calculation of probability space is subsequently implemented and the discrete data are expanded as well. And then the entropy of the expanded data that contain robust wall clutter and echo of target is calculated. Taking into consideration the amplitude of target signal varying in each scan, while that of clutter signal is not, it is evident that the entropy can be utilized to discriminate the signals between the target and wall. According to the difference between the entropy of the wall clutter and that of the target, a certain threshold can be set and the optimum tolerance threshold is adaptively selected on the basis of target-to-clutter ratio. With the optimum tolerance threshold, process of clutter suppression is conducted. Finally, back projection is employed for imaging of target. In this paper, data of through-wall radar for simulation are provided by GprMax2D/3D, based on the finite difference-time domain methsd. The clutter suppression and imaging are separately conducted by the method based on data entropy and the method proposed in this paper. Comparing the results of simulations, it is shown that the gain of target-to-clutter ratio for the former is 15.51 dB, and that for the latter is 19.74 dB. It is obvious that the proposed method can provide imaging with higher quality for the same measurement, and it requires fewer scans with the same quality of imaging as well. Computational complexity of the proposed method and the method based on entropy can be expressed as O (M . N-L) and O (M . N), respectively

A new wall clutter reduction strategy for through wall radar imaging

Wall clutter mitigation based on singular value decomposition

An Efficient Clutter Reduction Method in Through-Wall-Radar Imaging

An SVD method for clutter mitigation in MIMO Through-the-Wall Radar Imaging based on subspace proj ection

Adaptive Wall Clutter Suppression Based on DPSS Basis and Channel Correlation for Through-the-Wall Radar

Block Adaptive Subspace Pursuit Method for Wall Clutter Mitigation

Suppression of Direct Wave and Wall Clutter for Through-Wall Imaging by Spread Spectrum Radar.

Clutter Reduction and Target Tracking in Through-the-Wall Radar

A Method of Wall Clutter Removal for Through-Wall Radar Based on Entropy of Expanded Antenna Source

Wall Parameters Estimation Method for Through-the-wall Radar Imaging

A New Algorithm for Through-Wall-Radar Building Layout Imaging

A New Wall Compensation Algorithm for Through-the-Wall Radar Imaging

Joint wall clutter mitigation and data-driven model for through-wall detection

Clutter Reduction Based on Coefficient of Variation in Through-Wall Radar Imaging

A New Approach For Wall Parameters Estimation In Through-The-Wall Radar Imaging

Performance analysis of signal processing algorithms for wall clutter mitigation and contrast target detection

Wall Clutter Suppression Method Based on Amplitude Coherence Factor for MIMO Through-the-Wall Radar

A Novel Method for 3-D Building Structure Determination in Through-the-Wall Radar

Multi-path Suppression Algorithm for Through-the-wall Imaging

Wall compensation algorithm for through-wall-radar building layout imaging

Front-Wall Clutter Removal in Through-the-Wall Radar Based on Weighted Nuclear Norm Minimization