Abstract:According to California's 2016 Building Energy Efficiency Standards, the percentage flicker of light-emitting diode (LED) lighting fixtures should be below 30%. However, the percentage flicker of commercially available linear power supplies is generally between 25% and 99.9%; thus, some LED lighting fixtures that use linear power supplies have been unable to enter the European or American markets. The traditional method of effectively reducing flicker involves increasing the capacitance of the electrolytic capacitor of the power supply, which causes an increase in the height of the lamp board components as well as shadowing and dark band phenomena. This paper presents a power supply circuit that uses only electrolytic capacitors with low capacitance and exhibits constant power, constant light output, and a lamp board thickness of only 8 mm; it can achieve a percentage flicker of less than 10%, which exceeds international standards. Power efficiency is a crucial performance indicator of linear power supplies. Because linear power supplies are mostly integrated circuits (ICs) with extremely small package volumes, higher power efficiency results in lower heat loss. The international standard for the power efficiency of linear power supplies is approximately 75%. A multistage switching mechanism is used in the proposed power supply to achieve an overall efficiency of > 88%. Under an input power of 12 W, a 10% increase in efficiency reduces the heat by 1.2 W, which can considerably reduce the difficulty and cost of heat dissipation in IC packages. By combining the aforementioned technologies, the proposed power supply can achieve high efficiency and low percentage flicker, thereby improving the shortcomings of traditional linear power supplies. Currently, the driver-on-board (DO- ) module of the proposed power supply is in the trial production phase, and its market entry will be accelerated to expand the market share of linear power supplies.

Multiple Voltage Driving Method for Reducing Invalid Power Caused by Unlighted Lines in PDPs

An Electrolytic-Capacitorless And Inductorless Ac Direct Led Driver With Power Compensation

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

Dynamic Voltage Scaling for Low Power AMOLED Displays with Improved Luminous Uniformity

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

Low-Power Driving Waveform Design for Improving the Display Effect of Electrophoretic Electronic Paper

Reducing Power Consumption of Active-Matrix Mini-LED Backlit LCDs by Driving Circuit

Ultra-Low Percentage Flicker High-Efficiency Direct AC LED Driver Using Constant Power Technology

Optimized Electrophoretic Display: Dynamic Multiwaveform Invocation With Localized Time-Division for Low-Flicker Video Display

Study of Improving Luminous Efficacy of Plasma Display Panel in Sustain Period with Nanosecond Pulse Drive of Adjustable Waveform

Driving Method by Digital Signal for Twisted Nematic Liquid Crystal Display

14-2: Data-Line Driver with Gray-Level-Dependent Far-End Auxiliary Driving for Large AMOLED Display Panel

A Simple Current Balancing Method For Multi-Output Flyback Led Driver

Improving Flicker of Low-Refresh-Rate Driven Active-Matrix Organic Light-Emitting Diode Display

A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC–DC Drivers

Driving Scheme Optimization for Electrowetting Displays Based on Contact Angle Hysteresis to Achieve Precise Gray-Scales

Dynamic Backlight Scaling Considering Ambient Luminance for Mobile Videos on LCD Displays

LTPS TFT-Based Backlight Unit Using PWM Driving With Compensation for $\textit{V}_{\text{TH}}$ Variation and Voltage Rise in Power Line

P-34: A Peripheral Compensation Scheme for AMOLED with Data Voltage, VTHand Aging Information Analogously Added in Pixel Circuit

Highly consistent image compensation method based on a time-sharing longitudinal and transverse oscillation driving waveform for electrophoretic video display

Improvement of video playback performance of electrophoretic displays by optimized waveforms with shortened refresh time