Abstract:Radio frequency (RF) chain circuits play a major role in digital receiver architectures, allowing passband communication signals to be processed in baseband. When operating at high frequencies, these circuits tend to be costly. This increased cost imposes a major limitation on future multiple-input multiple-output (MIMO) communication technologies. A common approach to mitigate the increased cost is to utilize hybrid architectures, in which the received signal is combined in analog into a lower dimension, thus reducing the number of RF chains. In this work we study the design and hardware implementation of hybrid architectures via minimizing channel estimation error. We first derive the optimal solution for complex-gain combiners and propose an alternating optimization algorithm for phase-shifter combiners. We then present a hardware prototype implementing analog combining for RF chain reduction. The prototype consists of a specially designed configurable combining board as well as a dedicated experimental setup. Our hardware prototype allows evaluating the effect of analog combining in MIMO systems using actual communication signals. The experimental study, which focuses on channel estimation accuracy in MIMO channels, demonstrates that using the proposed prototype, the achievable channel estimation performance is within a small gap in a statistical sense from that obtained using a costly receiver in which each antenna is connected to a dedicated RF chain.

RF Channelizer Architectures Using Iterative Downconversion for Concurrent or Fast-Switching Spectrum Analysis

RF channelizer architectures using 3-way iterative down conversion for concurrent or fast-switching spectrum analysis

Selectable-FSR 10-Ghz Granularity WDM Superchannel Filter in a Reconfigurable Photonic Integrated Circuit

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

A 0.5-8Ghz Reconfigurable CMOS RF Receiver Front-end for CR and DPA Applications

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

Photonic Down-Conversion and Linearisation with Tunable IF Bandwidth and Improved Spurious-Free Dynamic Range

An Ultra Broadband Passive Vector Modulator Phase Shifter

Design and FPGA Implementation of a Reconfigurable 1024-Channel Channelization Architecture for SDR Application.

Microwave Photonics‐based Channelized Receiving and Reconstruction for Broadband RF Signal

Photonic-assisted Seamless Channelization Based on Integrated Three-Stage Cascaded DIs

Low complexity reconfigurable channelizers using non-uniform filter banks

Dual-polarization RF Channelizer Based on Kerr Soliton Microcomb Sources

RF Chain Reduction for MIMO Systems: A Hardware Prototype

Photonics-Assisted RF Channelizer Based on Integrated Ring Modulator

Design of Reconfigurable FRM Channelizer using Resource Shared Non-maximally Decimated Masking Filters

High-Resolution Wideband Digital Channelizer with Adjustable Reconstruction Performance.

27.5-29.5 GHz Switched Array Sounder for Dynamic Channel Characterization: Design, Implementation and Measurements

FPGA Implementation of a Reconfigurable Channelization for Simultaneous Multichannel DRM30/FM Receiver.

Analysis and Design of a Quadrature Down-Conversion Mixer for UHF RFID Readers

An Efficient Multi-protocol RFID Interrogator Baseband Processor Based on a Reconfigurable Architecture