Abstract:Summary form only given. In this work, effect of dielectric temperature on atmospheric pressure nonequilibrium plasma jets (APNPJs) with different dielectric materials has been investigated 1-2 . In our experiments, a single-electrode plasma generation equipped with an AC power supply is applied. Two materials, 95% alumina ceramic and quartz are adopted as dielectric tube. To distinguish the APNPJ status from the argon flow rate, the three modes, laminar, transition and turbulent, are separated.It is found that, with the dielectric wall heated, the APNPJ len gth and volume are enhanced over a large range of flow rates with both ceramic and quartz tube. Contrast with the situation of quartz tube, the transition regions has a significant `bulge' in ceramic tube with heated wall. This result indicates that di fferent factors contribute to the expansion of the transition re gion. The increase in the radial and axial velocities is the mai n cause of the expansion of the transition region to the low-ve locity region. The expansion to the high-velocity region is do minantly induced by a change in the viscosity. For the case of high temperature in quartz tube, the peak length of plasma pl ume has even greater enhancement under different applied vo ltages. The maximum values of jet length with 7 kV applied voltage are 5.15 cm in quartz tube and 4.50 cm in ceramic tu be, respectively. For both ceramic and quartz tube, obvious di stinction of longest length versus applied voltage is disclosed between two different dielectric temperatures. In room tempe rature, the trend of longest length versus voltage is upward, b ut it shows an entirely opposite tendency in high temperature. It is believed that the interaction between the dielectrics and plasmas is the dominant reason.

Study of Cold Ar Atmospheric Pressure Plasma Jet Generated with the Tapered Quartz Tube

Experimental study of a microsecond-pulsed cold plasma jet

Study of the Characteristics of Cold Ar Atmospheric Pressure Plasma Jet Generated with Inverted Tapered Tube

Contrasting Characteristics of Atmospheric Pressure Cold Plasma Jets with Different Tube Materials

Experiment and Simulation on the Discharge Modality of Atmospheric Pressure Plasma Jets in Argon Based on Coaxial Straight Tube and Inverted Tapered Tube

Numerical Study of Atmospheric-Pressure Argon Plasma Jet Propagating into Ambient Nitrogen

A Simple Cold Ar Plasma Jet Generated with a Floating Electrode at Atmospheric Pressure

An Atmospheric-Pressure Helium Plasma Jet Induced by an Atmospheric-Pressure Argon Plasma Discharge in A Single-Electrode Configuration

A Parametric Study of a Cold Atmospheric Plasma Jet

Characteristic Study of Cold Atmospheric Argon Plasma Jets with Rod-Tube/Tube High Voltage Electrode

Study on Argon Plasma Jets at Atmospheric Pressure in Ambient Air Excited by Surface Waves

Integrated experimental and zerodimensional numerical analysis of an atmospheric pressure reactive argon plasma jet generated by dielectric barrier discharges

Effect of Dielectric Temperature on Ar Atmospheric Pressure Nonequilibrium Plasma Jet with Different Dielectric Materials

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

A Diffuse Plasma Jet Generated from the Preexisting Discharge Filament at Atmospheric Pressure

Numerical and Experimental Study on a Pulsed-Dc Plasma Jet

Optical and Electrical Diagnostics of Cold Ar Atmospheric Pressure Plasma Jet Generated with a Simple DBD Configuration

Generation of Cold Argon Plasma Jet at the End of Flexible Plastic Tube

Effect of the Grounded Electrode on Cold Ar Atmospheric Pressure Plasma Jet Generated with a Simple DBD Configuration

Spectroscopic Investigation of the Argon Plasma Discharge in Quartz Capillary at Atmospheric Pressure

Comparative Study on the Atmospheric Pressure Plasma Jets of Helium and Argon