Abstract:Serving the Stewart mechanism as a wheel-legged structure, the most outstanding superiority of the proposed wheel-legged hybrid robot (WLHR) is the active vibration isolation function during rolling on rugged terrain. However, it is difficult to obtain its precise dynamic model, because of the nonlinearity and uncertainty of the heavy robot. This paper presents a dynamic control framework with a decentralized structure for single wheel-leg, position tracking based on model predictive control (MPC) and adaptive impedance module from inside to outside. Through the Newton-Euler dynamic model of the Stewart mechanism, the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart. The actuating force naturally enables each strut to stretch and retract, thereby realizing six degrees-of-freedom (6-DOFs) position-tracking for Stewart wheel-leg. The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z -axis. This adjustment allows the robot to adequately control the desired support force tracking, isolating the robot body from vibration that is generated from unknown terrain. The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips. By comparing the proportional and integral (PI) and constant impedance controllers, better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder, as well as an inertial measurement unit (IMU) mounted on the robot body. The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot.

Design and Implementation of a Kind of Neural Networks Robustness Controller for Variable Structure Bicycle Robot's Track-Stand Motion.

Controller design for a class of nonlinear uncertain systems

Performance-Oriented Coordinated Adaptive Robust Control For Four-Wheel Independently Driven Skid Steer Mobile Robot

An RBF-based Neuro-Adaptive Control Scheme to Drive a Lower Limb Rehabilitation Robot.

Adaptive-neural-network-based robust lateral motion control for autonomous vehicle at driving limits

Motion Control of A Noval Bipedal Wheeled Robot:VC-I

Robust Control of a Space Robot Based on an Optimized Adaptive Variable Structure Control Method

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot

Design of a robust intelligent controller based neural network for trajectory tracking of high-speed wheeled robots

Self-adaptive Composite Control for Flexible Joint Robot Based on RBF Neural Network

Robust Neural Network Control of Robotic Manipulators Via Switching Strategy.

Robust controller design and experimental validation based on bounded uncertainty for collaborative industrial robots

Robust Steering Angle Tracking Control for Steer-by-wire System

Polynomial Controller for Bicycle Robot Based on Nonlinear Descriptor System

Optimal robust control of vehicle lateral stability using damped least-square backpropagation training of neural networks.

Neural-Learning-Based Control for a Constrained Robotic Manipulator with Flexible Joints

Robust Internal Model Control with Feedforward Controller for a High-Speed Motion Platform

Robust control of reaction wheel bicycle robot via adaptive integral terminal sliding mode

Adaptive Robust Control of Skid Steer Mobile Robot with Independent Driving Torque Allocation

Design of Robust Adaptive Neural Switching Controller for Robotic Manipulators with Uncertainty and Disturbances