Abstract:A three-dimensional (3D) nonisothermal model is developed and applied for anode-supported planar solid oxide fuel cell (SOFC). The mass and momentum, species, ion, electric, and heat transport equations are solved simultaneously by implementing the electrochemical kinetics and electrochemical reaction as volumetric source terms. The interconnect land limits the O-2 transport under the land and lowers the local current density under the land. The effects of interconnect land width and cathode substrate thickness on SOFC cell performance are quantified in this study. Cathode stoichiometry is found to have a large effect on the SOFC cell temperature distribution. Under low-cathode stoichiometry, significant temperature gradients are seen in the SOFC cell. Higher-cathode stoichiometry is beneficial for lower temperature and more uniform current density distribution in SOFC cell. Co-flow and counter-flow arrangements are investigated and discussed with the model. Counter-flow arrangement is found to induce a high temperature and high current density region near the H-2 inlet. On the other hand, co-flow arrangement leads high temperature and high current density to occur relatively downstream, a slightly lower maximum temperature on cell and considerably more uniform current density distribution. A 67.2-cm(2) SOFC cell is simulated considering the side cooling effect. The side cooling effectively lowers the cell temperature, at the same time, causes temperature, current density, and fuel utilization nonuniformity in the across multichannel direction. Because of the strong coupling of the in-plane current density distribution and temperature distribution, limiting the locally high temperature and temperature gradient is critical for achieving a more uniform current density distribution in anode-supported planar SOFC.

Development of a Quasi 2-D Modeling of Tubular Solid-Oxide Fuel Cell for Real-Time Control

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Modeling of Solid Oxide Fuel Cell with Anisotropic Conductivity

Development of a Multi-Physical 2-D Model of PEM Fuel Cell for Real-Time Control

A Microscale Modeling Tool For The Design And Optimization Of Solid Oxide Fuel Cells

A Multi-Domain Syngas Solid Oxide Fuel Cell Model for Transportation Applications

Co-Oxidation Modeling for a Syngas-Supplied Microtubular Solid Oxide Fuel Cell

Modeling and Numerical Simulations of Planar Solid Oxide Fuel Cell

Modeling and Simulation of High Temperature Direct Internal Reforming Solid Oxide Fuel Cell

Multidimensional Reversible Solid Oxide Fuel Cell Modeling for Embedded Applications

Numerical Stiffness Study of Multi -Physical Solid Oxide Fuel Cell Model for Real-Time Simulation Applications

Modeling and Simulation of Solid Oxide Fuel Cell Based on the Volume–resistance Characteristic Modeling Technique

Modeling Validation and Simulation of an Anode Supported Sofc Including Mass and Heat Transport, Fluid Flow and Chemical Reactions

Numerical Simulation of Tubular Solid Oxide Fuel Cells

Three‐dimensional Nonisothermal Modeling of Solid Oxide Fuel Cell Coupling Electrochemical Kinetics and Species Transport

Dynamic Simulation of A Solid Oxide Fuel Cell System for Micro Combined Heat and Power Application

Numerical Simulation of Solid Oxide Fuel Cells Comparing Different Electrochemical Kinetics

Numerical Simulation of Multi-Channel Planar Solid Oxide Fuel Cell Unit by Integrating Continuum Micro-Scale Pen Sub-Model

Three-Dimensional Modeling of Planar Solid Oxide Fuel Cells and the Rib Design Optimization

Numerical Simulation of a Direct Internal Reforming Solid Oxide Fuel Cell Using Computational Fluid Dynamics Method