Abstract:It is generally known that the dc breakdown strength of low density polyethylene (LDPE) decreases with as the thickness and temperature of the sample increase. The breakdown strength is influenced by the charge transport and electric field distortion, and is also related to the molecular chain displacement and fracture. This paper investigates mutual relations among the charge transport, molecular chain displacement, and thickness dependent dc breakdown of LDPE. A model that combines the dynamics of charge transport and molecular displacement (CTMD) is used to calculate the space charge accumulation, molecular chain displacement, and dc breakdown properties of LDPE with various thicknesses at various constant voltage ramping rates. It is assumed that breakdown occurs when the molecular chain displacement reaches a critical value. The simulation results show that the breakdown field as a function of sample thickness satisfies an inverse power law with a power index of about 0.43 for various voltage ramping rates. This is consistent with experimental results. The CTMD model considers both the distortion of electric field and the displacement kinetics of molecular chains, resulting in a power index closer to the experiment than that calculated only from the electric field distortion. Adopted a Williams-Landel-Ferry type molecular chain mobility in the CTMD model, the simulation results are consistent with the results calculated by applying experimental results on polyisobutylene and polymethyl methacrylate to the free volume breakdown theory. It is also found that the CTMD model with temperature-dependent molecular chain mobility controlled by piecewise Arrhenius equations can explain well the temperature dependent breakdown experimental results of LDPE.

The effect of charge recombination on surface potential decay crossover characteristics of LDPE

Modeling on effects of charging time and recombination on surface potential decay crossover of LDPE

Simulation on the Influence of Bipolar Charge Injection and Trapping on Surface Potential Decay of Polyethylene

Surface Potential Decay on LDPE and Its Nanocomposites

A Comparison of Numerical Methods for Charge Transport Simulation in Insulating Materials

Investigation into Surface Potential Decay of Polyimide by Unipolar Charge Transport Model

Investigation of Current Density, Recombination Rate and Space Charge Density in Polyethylene Thin Films Based on Bipolar Charge Transport Model

Charge Transport Properties of Insulators Revealed by Surface Potential Decay Experiment and Bipolar Charge Transport Model with Genetic Algorithm

Simulation of Space Charge Accumulation in LDPE under Temperature Gradient with Temperature Dependent Parameters

Surface Modification-Dominated Space-Charge Behaviors of LDPE Films: A Role of Charge Injection Barriers

Numerical Analysis of Space Charge Accumulation and Conduction Properties in LDPE Nanodielectrics

Simulation of space charge behavior in LDPE with a modified of bipolar charge transport model

Improved Space Charge Transport Model in Bi-Layer Dielectrics—considering Carrier Dynamic Equilibrium

Measurement and Analysis of Electric Potential Decay in Corona Charged Low-Density Polyethylene Films

The Effect of Surface Charge Decay on Variation of Partial Discharge Location

Polarity Effect on Space Charge Distributions in Polymer Under DC Electric Field

Numerical Simulation on Molecular Displacement and DC Breakdown of LDPE

Investigation of Effects of Charge Injection and Intrinsic Ionic Carriers in Low-Density Polyethylene and Cross-Linked Polyethylene

Numerical analysis of various space charge packet behaviors in low-density polyethylene under different high DC voltage

Mobility‐limited charge injection in cross‐linked polyethylene under extra high electric field

Study On The Recombination Rate Of Space Charge In Ldpe Film During The Short-Circuit Discharge Process By Photon Calculation