Abstract:The fundamental aspects of site preference of alloying elements on sublattice of the strengthen γ′ phase with L12 structure have not been well understood, which hinders the optimized design of advanced Ni-based high-temperature alloys. In this contribution, the temperature- and composition-dependent site occupying preferences of the binary, ternary, and quaternary of Ni3Al-based γ′ phase alloyed with Mi where Mi represents the additional transitional metals Co, Cr, Cu, Fe, Mn, Mo, Re, Ta, Ti, V, or W atoms (arranged in alphabetical order) chosen frequently, were studied using a two-sublattice thermodynamic model (Ni, Al, Mi)1a(Ni, Al, Mi)3c. The site occupying fractions (SOFs) were calculated based on a thermodynamic database established in this work, where the thermodynamic data of the end-members involved were obtained using first-principles calculations and phonon spectrum calculations. The calculated SOFs results show that there is an obvious site preference for stoichiometry binary Ni3Al, and its site configuration changes from (Al)1a(Ni)3c at room temperature to (Al0.9984Ni0.0015)1a (Al0Ni0.9994)3c at 1273 K. For the γ′ phase with the composition 78Ni-26Al-4Mi (atom ratio and xNi/xAl = 3:1), Mo atoms always preferred to occupy the 1a sublattice (Al site), Co, Mn, and Ti atoms always prefer the 3c sublattice (Ni site) in the whole temperature range, while the site preference of Cr, Cu, Fe, Re, Ta, V, or W atom is affected by temperature. For example, when the heat treatment temperature is lower than 700 K, Cr, Cu, Fe, Ta, V, and W atoms occupy the 1a and 3c sublattice randomly, and Re atoms prefer to 3c sublattice, while when the heat treatment temperature is higher than 1273 K, Cr, Cu, and W atoms prefer 3c sublattice, Fe and Ta atoms prefer to 1a sublattice, while all Re atoms occupy the 3c sublattice exclusively, and all V atoms occupy the 1a sublattice exclusively, respectively. Likewise, the site preference of the quaternary system with selective compositions 78Ni-26Al-2 M1-2 M2 was also predicted. Based on calculated SOFs results, the mechanical and thermodynamic properties were studied at the ground state. It has been revealed that Cr, Re, and V doping can improve the microhardness of Ni3Al alloys; in particular, the effect of Cr is extraordinary; and all elements, except Mn, Mo, and Ti, would enhance the bulk modulus of Ni3Al-based γ′ phase, in which Mn have the greatest influence on reducing the bulk and shear modulus, respectively. Furthermore, all the B/G ratios of the computed Ni3Al-based γ′ phase are >1.75, showing inherent ductility. Only Cr doping significantly enhances the Debye temperature of the Ni3Al-based γ′ phase.

First principles study of the different configurations of W and Mo in the γ/γ' phase

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

First-principles Study the Phase Stability and Mechanical Properties of Binary W-Mo Alloys

First-principles study phonon and thermodynamic properties of binary W-Mo alloys

First-principles Investigation on Alloying Effect of Nb and Mo in Γ-Tial

Inversion calculation of the interatomic potentials for Ni0.75AlxMo0.25-x alloy employing microscopic phase-field model

First-principles investigation of the site preference and alloying effect of Mo, Ta and platinum group metals in γ′-Co3γ′-Co3(Al,W)

Tunable electronic properties of two-dimensional transition metal dichalcogenide alloys: A first-principles prediction

Effect of Mo on the coherent interface features of γ′-phase strengthened Co-based superalloys

First-Principles Investigation Of The Site Preference And Alloying Effect Of Mo, Ta And Platinum Group Metals In Gamma '-Co-3(Al, W)

The alloying mechanisms of Re, Ru in the quaternary Ni-based superalloys γ/γ′ interface: A first principles calculation

Cluster structure of doped atoms and elastic properties in γ-Ni by first-principles calculations

Insight into Point Defects and Complex Defects in β-Mo2C and Carbide Evolution from First Principles

Optimization of thermal stability and mechanical properties of Mo2C carbides via multi-element doping: experimental and theoretical calculations

First Principles Study of Structural Stability and Magnetic Property of Non-equilibrium Co–Mo Alloys

First-principles investigation of the alloying effect of refractory elements Ta and W in the misfit dislocation core of γ/γ′ (0 0 1) interface

Effect of substituting Mo for W on γ/γ′ partitioning behaviors of alloying elements in heat-treated second generation Ni based single crystal superalloys: An atom probe tomography study

Partitioning Behavior and Lattice Misfit of Γ/γ′ Phases in Ni-based Superalloys with Different Mo Additions

The site preference and doping effect on mechanical properties of Ni3Al-based γ′ phase in superalloys by combing first-principles calculations and thermodynamic model

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni3Al-based γ′ phase

First-Principles Study of Mechanical and Thermodynamic Properties of Binary and Ternary CoX (X = W and Mo) Intermetallic Compounds