Abstract:Transactions of the Institute of Measurement and Control, Ahead of Print. Accurate dynamic parameters are essential for precise control of model-based manipulators. Due to the direct connection between the joint axis and the motor rotor of the direct drive manipulator, using additional joints would increase the disturbance of the system, leading to substantial trajectory tracking errors, which could potentially harm the manipulator if the tracking error exceeds the limited position of joints, and it also curtails the comprehensive parameter excitation and affects the identification accuracy. Restricting joint movement to a narrow area can prevent this injury, but it also curtails the comprehensive parameter excitation and affects the identification accuracy. To address these challenges, this paper presents a novel method for identifying dynamic parameters of multiple degree-of-freedom (DOF) series direct drive manipulators. Specifically, an open-loop gravity torque compensation strategy with spatial geometric characteristics is introduced to ensure secure operation during manipulator identification processes. Meanwhile, an improved model reference adaptive identification (MRAI) method is presented to estimate the nominal inertia quickly and accurately. Finally, a disturbance observer (DOB) based on minimum model perturbation bound is proposed to compensate for significant variations in model disturbances, enabling stable and precise tracking of planned exciting trajectories. This proves advantageous for fully exciting dynamic parameters and improving identification accuracy. Simulation experiments demonstrate that the tracking error of each joint's exciting trajectory is within 0.07 radians, and the maximum absolute error of identifying dynamic parameters is 0.099169409, which verifies the feasibility and effectiveness of the proposed method.

The interactive parameters estimation of multiple space robot manipulators

PARAMETRIC IDENTIFICATION OF PARALLEL MANIPULATOR WITH REDUNDANCY DRIVEN BY PNEUMATIC MUSCLES

Adaptive Control of Mini Space Robot Based on Linear Separation of Inertial Parameters

An Online One-Step Method to Identify Inertial Parameters of the Base and the Target Simultaneously for Space Robots in Postcapture.

Continuous-discrete Extended Kalman Filter Based Parameter Identification Method for Space Robots in Postcapture

The Parameter Identification Model Considering Both Geometric Parameters and Joint Stiffness.

Parameter Identification of Hydraulic Manipulators Considering Physical Feasibility and Control Stability

Inverse Kinematics Solving of a Novel Soft Manipulator with Vision and IMU Data

Adaptive Parameter Estimation and Control Design for Robot Manipulators with Finite-Time Convergence

Online One-Step Parameter Identification Method for a Space Robot with Initial Momentum in Postcapture

Dynamic Parameter Identification For A Manipulator With Joint Torque Sensors Based On An Improved Experimental Design

Improved dynamic parameter identification method relying on proprioception for manipulators

Parameter estimation survey for multi-joint robot dynamic calibration case study

Interactive Parameter Identification of Cellular Space Robots for Non-cooperative Spacecraft Takeover Control

An Improved Parameter Identification Method of Redundant Manipulator

An optimization technique for identifying robot manipulator parameters under uncertainty

Inertial Parameter Identification of Unknown Object Captured by a Space Robot

A novel dynamic parameter identification method for the multi-degrees-of-freedom series direct drive manipulator

Sensorless Human-Robot Interaction: Real-Time Estimation of Co-Grasped Object Mass and Human Wrench for Compliant Interaction

Parameters Concurrent Learning and Reactionless Control in Post-Capture of Unknown Targets by Space Manipulators

Promoting method for manipulator accuracy based on multi-variable prediction and compensation