Abstract:Body channel communication (BCC) has become a promising candidate in wireless body area networks (WBAN) due to its advantages in energy efficiency and security. However, BCC transceivers face two challenges: diverse application requirements and varying channel conditions. To overcome these challenges, this article proposes a re-configurable architecture for BCC transceivers (TRXs), whose key parameters and communication protocols can be software-defined (SD) according to the requirements. In the proposed TRX, the programmable direct-sampling receiver (RX) is a combination of a programmable low-noise amplifier (LNA) and a fast-convergent successive approaching register analog-to-digital converter (SAR ADC), to achieve simple but energy-efficient data reception. The programmable digital transmitter (TX) is essentially implemented by a 2-bit DAC array to transmit either wide-band carrier-free signals like 4-level pulse amplitude modulation (PAM-4) or non-return-to-zero (NRZ) or narrow-band carrier-based signals like on-off keying (OOK) or frequency shift keying (FSK). The proposed BCC TRX is fabricated in a 180-nm CMOS process. Through an in-vivo experiment, it achieves up to 10-Mbps data rate and 119.2 pJ/bit energy efficiency. Moreover, the TRX is able to communicate under long-distance (1.5 m) and body-shielding conditions by switching its protocols, which shows the potential to be deployed in all categories of WBAN applications.

Analysis of a compact BCC transceiver based on PLL FSK modulator/demodulator

A Small-Footprint Body Channal Communication Transceiver Using Only One Phase-Locked Loop As Modulator and Demodulator.

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

Analysis of Wave Propagation on Human Body Based on Stratified Media Model

A Low Phase Noise, Wideband and Compact CMOS PLL for Use in a Heterodyne 802.15.3c Transceiver

A Re-Configurable Body Channel Transceiver Towards Wearable and Flexible Biomedical Sensor Networks

A 4-Mbps 41-pJ/bit On-off Keying Transceiver for Body-channel Communication with Enhanced Auto Loss Compensation Technique

A Low-Power Reconfigurable Multi-Band Sliding-If Transceiver For Wban Hubs In 0.18 Mu M Cmos

An Ultra Low Power Baseband Transceiver IC for Wireless Body Area Network in 0.18- \mu M CMOS Technology

An ultra low power baseband transceiver IC for wireless body area networks

A 0.14nj/b 200mb/s Quasi-Balanced FSK Transceiver with Closed-Loop Modulation and Sideband Energy Detection

All-Digital Galvanically-Coupled BCC Receiver Resilient to Frequency Misalignment

A 10-Mbps 119.2-Pj/bit Software Defined Body Channel Transceiver Employing a CCII-based PGA and a 2.5-Bit/cycle ADC in 180-Nm CMOS

A Novel Low-Power Compact WBS Human Body Channel Receiver for Wearable Vital Signal Sensing Application in Wireless Body-Area Network

Design and feasibility study of human body communication transceiver based on FDM

2.4Ghz 20mb/s FSK Receiver Front-End and Transmitter Modulation PLL Design for Energy-Efficient Short-Range Communicaiton

A 2m-Range 711μW Body Channel Communication Transceiver Featuring Dynamically-Sampling Bias-Free Interface Front End

A 60Mb/s -64dBm Body Channel Communication Transceiver Utilizing Manchester Code

A 0.14-nJ/b 200-Mb/s 2.7–3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

An Energy Efficient Fully Integrated OOK Transceiver SoC for Wireless Body Area Networks