Abstract:This paper presents a turnkey integrated system that can be operated in real time for real textile manufacturers. Eight types of defects in woven fabric, including stain, broken end, broken weft, hole, nep, double pick, kinky weft and float can be recognized and classified. First, an image is captured by a CMOS industrial camera with a pixel size of 4600 × 600 above the batcher at 20 m/min. After that, the four-stage image processing procedure is applied to detect defects and for classification. Stage 1 is image pre-processing; the filtration of the image noise is carried out by a Gaussian filter. The light source is corrected to reduce the uneven brightness resulting from halo formation. The improved mask dodging algorithm is used to reduce the standard deviation of the corrected original image. Afterwards, the background texture is filtered by an averaging filter, and the mean value is corrected for histogram shifting, so that this system is robust to the texture and color changes of woven fabric. The binary segmentation threshold is determined using the mean value and standard deviation of an image with a normal sample. Stage 2 uses adaptive binarization for separation of the background and defects and to filter the noise. In Stage 3, the morphological processing is used before the defect contour is circled, i.e., four features of each block, including the defect area, the aspect ratio of the defect, the average gray level of the defect and the defect orientation, which are calculated according to the range of contour. The image defect recognition dataset consists of 2246 images. The results show that the detection success rate is 96.44%, and the false alarm rate is 3.21%. In Stage 4, the defect classification is implemented. The support vector machine (SVM) is used for classification, 230 defect images are used as training samples, and 206 are used as test samples. The experimental results show that the overall defect recognition rate is 96.60%, providing that the software and hardware equipment designed in this study can implement defect detection and classification for woven fabric effectively.

A New Method for Assessing Textile Fastness Based on Digital Imaging

Grading textile fastness. Part 1; Using a digital camera system

Grading textile fastness. Part 3: Development of a new fastness formula for assessing change in colour+,

Grading Textile Fastness. Part 4: an Inter‐laboratory Trial Using DigiEye Systems†,‡

Grading textile fastness. Part 2; Development of a new staining fastness formula

Instrumental Methods for Assessing Colour Fastness. Part 2 - Staining

Comparison of Instrumental Methods for Assessing Colour Fastness. Part 1 — Change in Colour

A Multispectral Imaging Approach to Colour Measurement and Colour Matching of Single Yarns Without Winding

Color representation of textile fabric using multispectral imaging technology

Colour Matching Comparison Between Spectrophotometric and Multispectral Imaging Measurements

Recolouring Digital Textile Printing Design with High Fidelity

Fluorescent Sizing Agents Based on Aggregation-Induced Emission Effect for Accurate Evaluation of Permeability and Coating Property

Preparation and Performance of Fluorescein Isothiocyanate-Labeled Fluorescent Starch and Polyvinyl Alcohol for Warp Sizing

Study on the Means of Measuring Wet Permeability in Fabric by Image Processing Technique

Rapid Antibacterial Assessments for Plastic and Textile Materials Against Escherichia coli

Image analysis to evaluate removal of particles from fabric surface

Analysis of Colorfastness in Metallic Prints Using Absorption Spectroscopy

Automated Optical Inspection for Defect Identification and Classification in Actual Woven Fabric Production Lines

Intelligent techniques and optimization algorithms in textile colour management: a systematic review of applications and prediction accuracy

Fast fabric defect detection algorithm based on integral image

Fabric Defect Detection Using Tactile Information