Abstract:We present a calibration plate for the binocular vision system, which is composed of a long-wavelength infrared camera and a visible spectrum camera with different resolutions. The calibration plate mainly consists of a white low-temperature aluminum plate with 7×7 round through-holes, a black high-temperature stainless steel plate, and a heating plate. It can be captured by the long-wavelength infrared camera and visible spectrum camera simultaneously. In order to reduce the influence of thermal crosstalk on the edge and angle sharpness of the thermal image of the chessboard calibration plate, we use the round through-holes to replace the black-white squares in the chessboard calibration plate. Based on the fabricated calibration plate, we also propose a related calibration method. The proposed method can quickly detect the calibration plate by using the YOLO-V4 neural network. The affine transformation is performed to get the front view of the calibration plate, and a novel circular detection strategy based on arc level instead of pixel-level is adopted to detect the edges of the round through-holes in the calibration plate. The centers of round through-holes are detected, and the parameters of the cameras are calculated according to the coordinates of the centers in the image coordinate system. The simulation experiments and error analysis have been done to verify the centers detection method. The simulation results show that the error of center detection is always less than 1.4 (pixel). In order to further verify the performance of the calibration plate and the proposed calibration method, a binocular vision system based on long-wavelength infrared camera and visible spectrum camera is fabricated, and the verification experiments have been done. In experiments, our calibration plate and the proposed method are compared with the famous Zhang's method. The calibration's average overall mean errors of the visible spectrum camera and long-wavelength infrared camera are about 0.0126 (pixel) and 0.0238 (pixel), and they are respectively decreased by 78.13% and 81.93% compared with Zhang's method. The re-projection error of the binocular vision system is about 0.548 (pixel), which is decreased by 24.52% compared with Zhang's method. The average calibration time of the proposed method is about 0.26s.

Camera Calibration for Plate Refractive Imaging System.

Camera Calibration Technique Based on Virtual 3D Object

Plate Refractive Camera Model and Its Applications

What Does Plate Glass Reveal about Camera Calibration?

Planar Visual Metrology Using Partition-Based Camera Calibration

Camera calibration method for an infrared horizon sensor with a large field of view

Calibration of a Camera-Array-based Microscopic System with Spatiotemporal Structured Light Encoding

Camera Calibration Method Based on Phase Encoding for Out-of-focus Condition

Partition-Based Camera Intrinsic and Extrinsic Parameters Calibration for Planar Visual Metrology

A Projector Calibration Method for Fringe Projection System

Binocular Vision Calibration Method for a Long-Wavelength Infrared Camera and a Visible Spectrum Camera with Different Resolutions.

A Novel Camera Calibration Method Based on Multiple Calibration Planes

System parameter calibration based on a specular and diffuse calibration plate

Infrared Camera Geometric Calibration: A Review and a Precise Thermal Radiation Checkerboard Target

Underwater Camera Model And Its Use In Calibration

Calibration of an integral imaging system with a lenslet array

Generic Calibration of an Integral Imaging Camera and Its Applications on 2D Integral Image Reconstruction and 3D Scene Reconstruction

Camera Calibration Based on Phase Estimation

Experimental Research for Relative Radiometric Calibration of Imaging Spectrometer Based on Savart Plates

A Simplified Imaging Model of Bi-Telecentric Lenses under Scheimpflug Condition and Its Calibration

An Automatic Calibration Method for the Field of View Aberration in a Risley-Prism-Based Image Sensor