Abstract:The time-to-digital converter(TDC) is an equipment which aims to measure the accurate time of the edges of the input signal. Our work present an I/O Tile based multi-phase clock time-to-digital TDC, which is implemented in Field-Programmable-Gate-Array(FPGA). A hit signal is sampled by 8 equidistant phase-shifted clocks in the I/O Tile. A differential I/O standard input signal connecting to the I/O Tile is buffered by an input buffer and split into two complementary outputs before feeding to two adjacent ISERDESes. The ISERDESes are configured as the oversample mode, which is used to capture 2 phase DDR data. One ISERDES is driven by 45° and 135° clocks, with the other ISERDES driven by 90° and 180° clocks. Four more clocks are produced by locally inverting logic in the two ISERDESes. An internal PLL is used to generate the clocks. This architecture makes the transmission line more stable and increases the frequency of the sampling clock. To evaluate the TDC's performance, we built a verification system with Xilinx Artix-7 XC7A100T-1 FPGA, which is integrated with 2 TDCs and a readout unit. Tests have been conducted on the performance of the I/O Tile based TDC. Results indicated that the integral nonlinearity is lower than 1 LSB, and the differential nonlinearity is lower than 0.32 LSB. The measurement resolution of 56ps (RMS) is archived.

A Multi-phase Clock Time-to-Digital Convertor Based on ISERDES Architecture.

A 56-ps multi-phase clock time-to-digital convertor based on Artix-7 FPGA

A high resolution multi-phase clock Time-Digital Convertor implemented on Kintex-7 FPGA

A high-resolution time-to-digital converter based on multi-phase clock implement in field-programmable-gate-array

A High Precision Time-To-Digital Converter Based on Multi-Phase Clock Implemented Within Field-Programmable-Gate-Array

A 256-channel multi-phase clock sampling-based time-to-digital converter implemented in a Kintex-7 FPGA

A high precision TDC based on a multi-phase clock

A ring-oscillator based multi-mode time-to-digital converter on Xilinx Kintex-7 FPGA

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

A Resource-saving Method for Implementation of High-Performance Time-to-Digital Converters in FPGA.

Two Novel Designs Of Multi-Phase Clocked Ultra-High Speed Time Counter On Fpga For Tdc Implementation

Two-Stage Clock-Free Time-to-Digital Converter Based on Vernier and Tapped Delay Lines in FPGA Device

Design of Reconfigurable Time-to-Digital Converter Based on Cascaded Time Interpolators for Electrical Impedance Spectroscopy

A High Precision Time-to-Digital Converter based on Multi-chain Interpolation with a Low Cost Artix-7 FPGA

High-Resolution, Multi-Channel FPGA-Based Time-to-Digital Converter

A 3.9-ps RMS Precision Time-to-Digital Converter Using Ones-Counter Encoding Scheme in a Kintex-7 FPGA

Low-Cost FPGA TDC with High Resolution and Density

A New Method of Implementing Vernier TDC in a Xilinx Kintex-7 FPGA

Implementation of a High Precision Multi-Measurement Time-to-digital Convertor on a Kintex-7 FPGA

A 1ps Resolution Two-Step Time-to-digital Converter Using Parallel Digital-to-time Converters

A 128-Channel High Performance Time-to-Digital Converter Implemented in an UltraScale FPGA