Abstract:An optimized handling stability control strategy is put forward aiming at enhancing a four in-wheel independent-drive motors electric vehicle (4WIDEV) performance capable of handling and stability. The optimized control strategy is designed by a hierarchical control structure, which mainly includes vehicle motion controller and vehicle torque distribution controller. Lateral stability controller, in-vehicle motion controller, which yields the generalized force and generalized yaw moment required of the vehicle, is designed into two modes: an instability control mode and a continuous control mode, which mode is activated determining by stability judgment controller based on phase portraits of sideslip angle and yaw rate. When the vehicle state exceeds the stability envelope region, instability control mode based on envelope control is utilized by sliding mode control method, simultaneously controlling the two-vehicle states variables, whereas continuous control mode is performed with adaptive adjustment of the weight parameter according to pre-defined stability degree. The lateral stability controller with adaptive switching two modes exhibits excellent handling stability performance under normal driving conditions, especially under critical conditions, such as on low tire-road adhesion coefficient. The vehicle torque distribution controller assigns driving or regenerative braking torque to four wheels reasonably and efficiently to satisfy the generalized force and the generalize yaw moment acquired by the vehicle motion controller, which synchronously considers the motor output capability and tire friction ellipse constraints while maintains each wheel slip ratio within the stable range. The results in co-simulation experiments based on Carsim and MATLAB/Simulink verify the proposed control strategy, compared with other control strategies, and demonstrate the effective improvement 4WIDEV’s performance in terms of handling stability especially under critical conditions.

Torque allocation strategy of 4WID in-wheel motor electric vehicle based on objective optimization

Wheel Torque Distribution of Four-Wheel-Drive Electric Vehicles Based on Multi-Objective Optimization

An Optimal Control Allocation Strategy for an Eight In-Wheel-motor Drive Electric Vehicle

Torque Distribution Strategy of Four-Wheel Independent Drive Electric Vehicle Based on Optimal Energy Consumption

Review on Torque Distribution Scheme of Four-Wheel In-Wheel Motor Electric Vehicle

Torque Distribution Algorithm for Four In-wheel Motors Drive Electric Vehicle Based on Torque Vector Control

Optimized Handling Stability Control Strategy for a Four In-Wheel Motor Independent-Drive Electric Vehicle.

An Optimal Torque Distribution Control Strategy for Four-Wheel Independent Drive Electric Vehicles Considering Energy Economy

Torque Coordinated Control of Four In-Wheel Motor Independent-Drive Vehicles with Consideration of the Safety and Economy

Multi-Objective Optimal Control Allocation for an Over-Actuated Electric Vehicle.

Design of Torque Distribution Strategy for Four-Wheel-Independent-Drive Electric Vehicle

Dynamic Energy-Efficient Torque Allocation Algorithm for In-Wheel Motor-Driven Vehicle

Nonlinear hierarchical control for four-wheel-independent-drive electric vehicle

An Energy-Saving Torque Vectoring Control Strategy for Electric Vehicles Considering Handling Stability Under Extreme Conditions

A Study on Driving Force Distribution of Four-Wheel-Independent Drive Electric Vehicle Based on Control Allocation

Torque optimization control for electric vehicles with four in-wheel motors equipped with regenerative braking system

Unveiling Four Key Factors for Tire Force Control Allocation in 4WID-4WIS Electric Vehicles at Handling Limits

Dynamic Control for Four-Wheel Independent Drive Electric Vehicle

Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling

Energy-efficient Torque-Allocation Strategy for a 6 × 6 Vehicle Using Electric Wheels

Development and evaluation of torque distribution methods for four-wheel independent-drive electric vehicle based on parameter estimation