Abstract:This study focuses on the development of a piezoelectric device capable of generating feedback vibrations to the user who manipulates it. The objective here is to explore the possibility of developing a haptic system that can replace physical buttons on the tactile screen of in-car systems. The interaction between the user and the developed device allows completing the feedback loop, where the user's action generates an input signal that is translated and outputted by the device, and then detected and interpreted by the user's haptic sensors and brain. An FEM (finite element model) via ANSYS multiphysics software was implemented to optimize the haptic performance of the wafer structure consisting of a BaTiO3 multilayered piezocomposite coated on a PET transparent flexible substrate. Several parameters relating to the geometric and mechanical properties of the wafer, together with those of the electrodes, are demonstrated to have significant impact on the actuation ability of the haptic device. To achieve the desired vibration effect on the human skin, the haptic system must be able to drive displacement beyond the detection threshold (~2 µm) at a frequency range of 100-700 Hz. The most optimized actuation ability is obtained when the ratio of the dimension (radius and thickness) between the piezoelectric coating and the substrate layer is equal to ~0.6. Regarding the simulation results, it is revealed that the presence of the conductive electrodes provokes a decrease in the displacement by approximately 25-30%, as the wafer structure becomes stiffer. To ensure the minimum displacement generated by the haptic device above 2 µm, the piezoelectric coating is screen-printed by two stacked layers, electrically connected in parallel. This architecture is expected to boost the displacement amplitude under the same electric field (denoted E) subjected to the single-layered coating. Accordingly, multilayered design seems to be a good alternative to enhance the haptic performance while keeping moderate values of E so as to prevent any undesired electrical breakdown of the coating. Practical characterizations confirmed that E=20 V/μm is sufficient to generate feedback vibrations (under a maximum input load of 5 N) perceived by the fingertip. This result confirms the reliability of the proposed haptic device, despite discrepancies between the predicted theory and the real measurements. Lastly, a demonstrator comprising piezoelectric buttons together with electronic command and conditioning circuits are successfully developed, offering an efficient way to create multiple sensations for the user. On the basis of empirical data acquired from several trials conducted on 20 subjects, statistical analyses together with relevant numerical indicators were implemented to better assess the performance of the developed haptic device.

LateralPaD: A Surface-Haptic Device That Produces Lateral Forces on a Bare Finger

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Flexible Piezoelectric Tactile Sensor Array For Dynamic Three-Axis Force Measurement

Three Degree-of-Freedom Soft Continuum Kinesthetic Haptic Display for Telemanipulation Via Sensory Substitution at the Finger

Wearable Haptic Device for Individuals with Congenital Absence of Proprioception

A Novel Silicon Based Tactile Sensor On Elastic Steel Sheet For Prosthetic Hand

A Flexible Tactile Sensor Array Based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection

Wearable Sensory Substitution for Proprioception via Deep Pressure

A Multi-Point Cutaneous Tactile Device for Fingertip Haptics

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

A 4-DoF wearable hand device for haptic rendering of surfaces and edges

Fingerprint-inspired Dual-mode Pressure Sensor for Robotic Static and Dynamic Perception

Design and Evaluation of a 3-DoF Haptic Device for Directional Shear Cues on the Forearm

Design of a haptic device for presenting pressure and skin stretching stimuli to the palm

Handheld Haptic Device with Coupled Bidirectional Input

Haptic Feedback Device Using 3D-Printed Flexible, Multilayered Piezoelectric Coating for In-Car Touchscreen Interface

Soft Wearable Skin-Stretch Device for Haptic Feedback using Twisted and Coiled Polymer Actuators.

A Hand-Held Device Presenting Haptic Directional Cues for the Visually Impaired

Localizable Button Click Rendering via Active Lateral Force Feedback

How the Mechanical Properties and Thickness of Glass Affect TPaD Performance