Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

A Practical Method for Weld Seam Position Detection.

3D vision-based weld seam extraction method

Seam detection method design and automatic calibration based on an active light coaxial visual sensor

A Vision Based Detection Method For Narrow Butt Joints And A Robotic Seam Tracking System

Real-time detection and localization method for weld seam of narrow butt joint based on semantic segmentation

A Novel Seam Tracking Technique with a Four-Step Method and Experimental Investigation of Robotic Welding Oriented to Complex Welding Seam

Efficient Weld Seam Detection for Robotic Welding Based on Local Image Processing

Weld seam track identification for industrial robot based on illumination correction and center point extraction

A Weld Position Recognition Method Based on Directional and Structured Light Information Fusion in Multi-Layer/Multi-Pass Welding

A Method of Feature Extraction of Position Detection and Weld Gap for GMAW Seam Tracking System of Fillet Weld With Variable Gaps

The Autonomous Detection and Guiding of Start Welding Position for Arc Welding Robot.

Multiseam tracking with a portable robotic welding system in unstructured environments

An image segmentation-based localization method for detecting weld seams

Feature point extraction based on contour detection and corner detection for weld seam

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Recognition of the Initial Position of Weld Based on the Image Pattern Match Technology for Welding Robot

Vision Sensing and Surface Fitting for Real-Time Detection of Tight Butt Joints

A 3D seam extraction and tracking method based on binocular structured light sensor

A Method of D-Type Weld Seam Extraction Based on Point Clouds

Online Extraction of Pose Information of 3D Zigzag-Line Welding Seams for Welding Seam Tracking

Robust weld seam tracking method based on detection and tracking of laser stripe