Abstract:The human hand plays a role in a variety of daily activities. This intricate instrument is vulnerable to trauma or neuromuscular disorders. Wearable robotic exoskeletons are an advanced technology with the potential to remarkably promote the recovery of hand function. However, the still face persistent challenges in mechanical and functional integration, with real-time control of the multiactuators in accordance with the motion intentions of the user being a particular sticking point. In this study, we demonstrated a newly-designed wearable robotic hand exoskeleton with multijoints, more degrees of freedom (DOFs), and a larger range of motion (ROM). The exoskeleton hand comprises six linear actuators (two for the thumb and the other four for the fingers) and can realize both independent movements of each digit and coordinative movement involving multiple fingers for grasp and pinch. The kinematic parameters of the hand exoskeleton were analyzed by a motion capture system. The exoskeleton showed higher ROM of the proximal interphalangeal and distal interphalangeal joints compared with the other exoskeletons. Five classifiers including support vector machine (SVM), K-near neighbor (KNN), decision tree (DT), multilayer perceptron (MLP), and multichannel convolutional neural networks (multichannel CNN) were compared for the offline classification. The SVM and KNN had a higher accuracy than the others, reaching up to 99%. For the online classification, three out of the five subjects showed an accuracy of about 80%, and one subject showed an accuracy over 90%. These results suggest that the new wearable exoskeleton could facilitate hand rehabilitation for a larger ROM and higher dexterity and could be controlled according to the motion intention of the subjects.

Experimental Study of an Emg-Controlled 5-Dof Anthropomorphic Prosthetic Hand for Motion Restoration

Improving the Robustness of Human-Machine Interactive Control for Myoelectric Prosthetic Hand During Arm Position Changing

EMG control of a 3-DOF anthropomorphic prosthetic hand

A 3-DOF Anthropomorphic Prosthetic Hand and Its EMG Control Method

A Novel EMG Control Method for Multi-DOF Prosthetic Hands with Electrical Stimulation Feedback.

Design and Myoelectric Control of an Anthropomorphic Prosthetic Hand

EMG Pattern Recognition and Grasping Force Estimation: Improvement to the Myocontrol of Multi-Dof Prosthetic Hands.

Single-channel surface electromyography (sEMG) based control of a multi-functional prosthetic hand

EMG Controlled Multifunctional Prosthetic Hand: Preliminary Clinical Study and Experimental Demonstration

Biomimetic Tactile Data Driven Closed-loop Control of Myoelectric Prosthetic Hand-.

A Bio-Mechanical Designed Prosthetic Hand With Multi-Control Strategies

A Compact Control System and A Myoelectric Control Method for Multi-DOFs Prosthetic Hand.

A Novel Method of Combining Computer Vision, Eye-Tracking, EMG, and IMU to Control Dexterous Prosthetic Hand.

Development of a Multi-Dof Prosthetic Hand with Intrinsic Actuation, Intuitive Control and Sensory Feedback.

A novel EMG controller for anthropomorphic prosthetic hands based on state switching mechanism

A Five-fingered Underactuated Prosthetic Hand System

Progress In The Biomechatronic Design And Control Of A Hand Prosthesis

Proof of Concept of an Online EMG-Based Decoding of Hand Postures and Individual Digit Forces for Prosthetic Hand Control

Surface Emg For Multi-Pattern Recognition With Sensory Feedback Controller Of Hand Prosthesis System

Online recognition of hand EMG patterns and grasping force based on support vector machines

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals