Abstract:Multi-agent system (MAS) protection is under investigation as a potential method for distributed control in modern electrical power systems. The coordination of the MAS is based on local measurements available to each agent's site as well as on the information exchanged between agents over the communication network. Hence, the communication network should be considered to be a main factor in determining overall system performance.Numerical simulation is a fundamental tool of the design process. Existing electric power simulation tools can satisfactorily model traditional power systems where power and communication are considered to be decoupled and MAS are not present. Similarly, the simulation tools for communication systems have been developed independently from the application, particularly power system scenarios, so they are decoupled from the actual use of the information. If the loop between communication and power is closed and the coupling is strong, as in MAS-controlled power systems, such a simulation environment may yield unrealistic results.Aiming at filling this gap, this paper proposes a co-simulation solution for power systems, communication networks, and MAS, based on the extended capability of the co-simulation platform called VPNET. VPNET consists of three parts: Virtual Test Bed for time domain simulation of power systems, OPNET for the simulation of communication networks, and the Co-simulation Coordinator for data exchange and time synchronization between the other two simulators. The Co-simulation Coordinator has been exploited for MAS integration, as the rules of each agent are defined in the modules provided by the Co-simulation Coordinator.The proposed extended co-simulation platform is tested in the analysis of the performance of the MAS-based protection schemes of a medium-voltage DC shipboard power system. Numerical simulations have been performed for communication testing and protection testing. In the communication test, the network parameters (bandwidth and transmission time) are analyzed to evaluate the performance of the communication network under various conditions; in particular, links failure. The MAS-based protection system was then tested under various operating conditions of the communication network (latency and links failure). From the simulation results it can be seen that the designed MAS protection can handle these conditions successfully. Particularly in the link failure conditions, this co-simulation platform could simulate the re-routing process of the communication network and lead to correct protection performance, which is impossible with individual simulators alone. These simulation results show the utility of VPNET in exploring the design trade-offs between protection strategies and communication in the design phase.

Cosimulation for Smart Grid Communications

A two-step simulation approach for joint analysis of power systems and communication infrastructures

Simulating the Smart Grid

Study of Co-Simulation Methods Applied in Power Systems （part I）： VPNET

Overview of the co-simulation methods for power and communication system

A Co-Simulation Platform for Smart Grid Considering Interaction Between Information and Power Systems

Ns3-Matlab Co-Simulator for Cyber-Physical Systems in Smart Grid

A co-simulation method as an enabler for joint analysis and design of MAS-based electrical power protection and communication

Interfacing Power System and ICT Simulators: Challenges, State-of-the-Art, and Case Studies

Integrated Simulation with VTB and OPNET for Networked Control and Protection in Power Systems

VPNET: A Co-Simulation Framework for Analyzing Communication Channel Effects on Power Systems

Study of co-simulation methods applied in power systems (Part II): MAPNET and real time HIL platform

A review of integrated modeling and simulation of control and communication systems in Smart Grid

Future Perspectives of Co-Simulation in the Smart Grid Domain

Smart grids co-simulations: Survey & research directions

An Integrated Cyber-Physical Simulation Environment for Smart Grid Applications

An Advanced Real-Time Simulation Laboratory for Future Grid Studies: Current State and Future Development.

Coupling OMNeT++ and mosaik for integrated Co-Simulation of ICT-reliant Smart Grids

From Co- Toward Multi-Simulation of Smart Grids based on HLA and FMI Standards

Simulation-based Validation of Smart Grids - Status Quo and Future Research Trends

Cyber physical modeling of distributed resources for distribution system operations