Abstract:Since most of the cable-driven parallel manipulators (CDPMs) are small in dimension or low in speed, the self-weight or inertia of the cable is neglected when dealing with the problems of kinematics, dynamics and workspace. The cable is treated as a massless straight line, and the inertia of the cable is not discussed. However, the camera robot is a large-span high-speed CDPM. Thus, the self-weight and inertia of the cable cannot be negligible. The curved cable due to the self-weight is modeled as a catenary to accurately account for its sagging effect. Moreover, the dynamic model of the camera robot is derived by decomposing the motion of the cable into an in-plane motion and an out-plane motion, based on which an iterative-based tension distribution algorithm and a workspace generation algorithm are presented. An optimization model is presented to simultaneously improve the workspace volume, anti-wind disturbance ability and impulse of tensions on the camera and pan–tilt device system (CPTDS) by selecting the proper optimal variables under the linear and nonlinear constraints. An improved genetic algorithm (GA) is proposed, and the simulation results demonstrate that the improved GA offers a stronger ability in global optimization compared to the standard genetic algorithm (SGA). The ideal-point method is employed to avoid the subjective influence of the designer when performing the multi-objective optimization, and a remarkable improvement of the performance is obtained through the optimization. Furthermore, the distribution characteristics of the optimization objects are studied, and some valuable conclusions are summarized, which will provide some valuable references in designing large-span high-speed CDPMs.

On the Minimum Cable Tensions for the Cable-Based Parallel Robots

Minimum Cable Tensions for a Cable-based Parallel Robot with Application to Stability Analysis: A Descriptive Study

Tension Optimization for a Cable-driven Parallel Robot with Non- Negligible Cable Mass

An Approach to Evaluate Stability for Cable-Based Parallel Camera Robots with Hybrid Tension-Stiffness Properties

Tension Restrained Workspace Analysis for Cable-Driven Parallel Robot

The Continuity and Real-Time Performance of the Cable Tension Determining for a Suspend Cable-Driven Parallel Camera Robot.

Rapid Optimization of Tension Distribution for Cable-Driven Parallel Manipulators with Redundant Cables

A Geometrical Workspace Calculation Method for Cable-Driven Parallel Manipulators on Minimum Tension Condition

Configuration Optimization and a Tension Distribution Algorithm for Cable-Driven Parallel Robots.

Optimal Cable Tension Distribution of the High-Speed Redundant Driven Camera Robots Considering Cable Sag and Inertia Effects

Non-iterative Geometric Method for Cable-Tension Optimization of Cable-Driven Parallel Robots with 2 Redundant Cables

Optimization of Redundant Driving Force for High-Speed Cable-Driven Parallel Camera Robots

Tension Optimization of a Cable-Driven Coupling Manipulator Based on Robot Dynamics with Cable Elasticity.

Workspace Analysis and Optimal Design of Cable-Driven Parallel Robots via Auxiliary Counterbalances

Stability analysis and optimal design of a cable-driven parallel robot

A novel real-time tension distribution method for cable-driven parallel robots

An approach on stability analysis of cable-driven parallel robots considering cable mass

Research on Controllable Stiffness of Redundant Cable-Driven Parallel Robots

Optimization and Control of Cable Tensions for Hyper-redundant Snake-arm Robots

Dynamic Modeling, Workspace Analysis and Multi-Objective Structural Optimization of the Large-Span High-Speed Cable-Driven Parallel Camera Robot

Design and Workspace Optimization of a 6/6 Cable-Suspended Parallel Robot