Abstract:Current state-of-the-art micromachined gyroscopes can not compete with the established sensors in high-accuracy application areas such as guidance and inertial navigation. In this paper one method based on homogeneous multi-sensor fusion was presented to improve the accuracy of the micromachined gyroscopes. In this method several gyroscopes of the same kind were combined into one single effective device through Kalman filtering, the performance of which would surpass that of any individual sensor. The secret of the performance improving lies in the optimal estimation of the random noise sources such as rate random walk and angular random walk for compensating the measurement values. Especially, the cross correlation between the noises of the same type from different gyroscopes was used to establish the system noise covariance matrix and the measurement noise covariance matrix for Kalman filtering to improve the performance further. On the other hand, contrasted with the current static filter design we firstly proposed one difference modeling method to establish the dynamic filter to satisfy the optimal estimation in the situation with angular rate input, in which the mutual subtraction of the measurement values between every two gyroscopes in the sensor array could avoid the trouble of obtaining the true rate. The experiments showed that three gyroscopes with bias drift of 35 degree per hour were able to be combined into one virtual gyroscope with drift of 0.15 degree per hour and 20 degree per hour through the presented static filter and dynamic filter respectively. The multi-sensor fusion method is really capable of improving the accuracy of the micromachined gyroscopes, which provides the possibility of using these low cost MEMS sensors in high-accuracy application areas.

Analysis of Dynamic Performance of a Kalman Filter for Combining Multiple MEMS Gyroscopes.

Combining Numerous Uncorrelated MEMS Gyroscopes for Accuracy Improvement Based on an Optimal Kalman Filter

Dynamic Performance Comparison of Two Kalman Filters for Rate Signal Direct Modeling and Differencing Modeling for Combining a MEMS Gyroscope Array to Improve Accuracy

A Novel Kalman Filter for Combining Outputs of Mems Gyroscope Array

Analysis Of The Improvement In Accuracy Using Multiple Gyros

The measurement correction of MEMS gyroscope based Interlaced Kalman Filtering

An Integrated MEMS Gyroscope Array with Higher Accuracy Output

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

Gyroscope Array Analysis Based on EMKF Algorithm

On Improving the Accuracy of Micromachined Gyroscopes Based on Multi-Sensor Fusion

AN ESTIMATION OF THE MEMS GYROSCOPE ERROR BASED ON THE KALMAN FILTER ALGORITHM

Signal Processing of Mems Gyroscope Arrays to Improve Accuracy Using A 1st Order Markov for Rate Signal Modeling

A Feedback Weighted Fusion Algorithm with Dynamic Sensor Bias Correction for Gyroscope Array

Performance Analysis Of Mems Gyro And Improvement Using Kalman Filter

Analysis of Correlation in MEMS Gyroscope Array and Its Influence on Accuracy Improvement for the Combined Angular Rate Signal

Adaptive Kalman Filter Enhanced With Spectrum Analysis for Wide-Bandwidth Angular Velocity Estimation Fusion

Noise Reduction of MEMS Gyroscope Based on Direct Modeling for an Angular Rate Signal

A Combined Method for MEMS Gyroscope Error Compensation Using a Long Short-Term Memory Network and Kalman Filter in Random Vibration Environments

Filtering Algorithm of MEMS Gyroscope Based on Swing Markov Interacting Multiple Models

An Adaptive Filtering Approach Based on the Dynamic Variance Model for Reducing MEMS Gyroscope Random Error

Optimal Compensation of MEMS Gyroscope Noise Kalman Filter Based on Conv-DAE and MultiTCN-Attention Model in Static Base Environment