Abstract:In this study, we controlled the growth of crystalline plane to synthesize the vertical platinum nanopelts onto fluorine doped tin oxide (FTO) glass to construct the platinum nanoroses (PtNRs) by an easy electrochemical deposition (ECD) method at room temperature in the normal atmospheric environment, and applied the PtNRs as a counter electrode (CE) for dye-sensitized solar cell (DSSC). The morphologies and crystalline nanostructures of the ECD PtNRs were examined by field emission scanning electron microscopy and the high-resolution transmission electron microscopy. The electrocatalytic properties of the ECD PtNRs were analyzed by cyclic voltammetry and electrochemical impedance spectrum. The power conversion efficiency (PCE) of the DSSC assembled with the ECD PtNRs CE was examined under the illumination of AM 1.5 (100mWcm−2). The ECD PtNRs showed well contact behavior with FTO surface and offered a large surface area to promote the redox reaction rates therefore increased the exchange current density. Due to the PtNRs showed the macroporous structure, the electrolyte can easily diffuse through the open space between the nanopelts, resulting in improved kinetics for charge-transfer processes and reduced the charge-transfer resistance. Our findings suggest that the catalytic efficiency of PtNRs with a specific crystal plane was significantly greater than that of a traditional Pt film catalyst. In combination with a N719 dye-sensitized TiO2 working electrode and an iodine-based electrolyte, the DSSC assembled with the PtNRs CE achieved a PCE of 6.58%, almost 10% higher than that of a cell prepared with a conventional sputtering Pt film CE (6.00%). These results provide a potential strategy for electrochemical catalytic applications.

Porous, Single Crystalline Titanium Nitride Nanoplates Grown on Carbon Fibers: Excellent Counter Electrodes for Low-Cost, High Performance, Fiber-Shaped Dye-Sensitized Solar Cells

One-Step Growth of Coni2s4 Nanoribbons on Carbon Fibers As Platinum-Free Counter Electrodes for Fiber-Shaped Dye-Sensitized Solar Cells with High Performance: Polymorph-Dependent Conversion Efficiency

NiCo2S4 nanosheets in situ grown on carbon fibers as an efficient counter electrode for fiber-shaped dye-sensitized solar cells

Porous Titanium Nitride Nanowire Array on Carbon Fiber for the Applications in Fiber-Shaped Solar Cell and Lithium-Ion Battery

Synthesis of Ternary Ni/Mo2C/Carbon Nanofibers As Low-cost Counter Electrode for Efficient Dye-sensitized Solar Cells

Porous Titanium Nitride Microspheres on Ti Substrate As a Novel Counter Electrode for Dye-Sensitized Solar Cells

NiCo2O4/carbon nanofibers composite as an efficient counter electrode for dye-sensitized solar cells

High performance platinum nanofibers with interconnecting structure using in dye-sensitized solar cells

Efficient Sinter-Free Nanostructure Pt Counter Electrode for Dye-Sensitized Solar Cells

Porous, platinum nanoparticle-adsorbed carbon nanotube yarns for efficient fiber solar cells.

Electrospinning Synthesis and Electrocatalytic Performance of Iron Oxide/carbon Nanofibers Composites As a Low-Cost Efficient Pt-free Counter Electrode for Dye-Sensitized Solar Cells

In situ direct growth of single crystalline metal (Co, Ni) selenium nanosheets on metal fibers as counter electrodes toward low-cost, high-performance fiber-shaped dye-sensitized solar cells.

Novel Two-Step Synthesis of Nis Nanoplatelet Arrays As Efficient Counter Electrodes for Dye-Sensitized Solar Cells

Electron Migration Optimization Through Nanostructural Control of Hierarchical Fe3O4 Based Counter Electrodes for High-Performance Dye-Sensitized Solar Cells

High Performance Dye-Sensitized Solar Cells Based on Platinum Nanoroses Counter Electrode

Facile synthesis of ZnCo2O4@NiMoO4 with porous coated structures on carbon paper as stable and efficient Pt-free counter electrode materials for advanced dye-sensitized solar cells

Carbon Nanostructured Fibers As Counter Electrodes in Wire-Shaped Dye-Sensitized Solar Cells

Ultrafine Transition Metal Phosphide Nanoparticles Semiembedded in Nitrogen-Doped Carbon Nanotubes for Efficient Counter Electrode Materials in Dye-Sensitized Solar Cells

Electrospun carbon nanofibers with surface-attached platinum nanoparticles as cost-effective and efficient counter electrode for dye-sensitized solar cells

Design of highly ordered hierarchical catalytic nanostructures as high-flexibility counter electrodes for fiber-shaped dye-sensitized solar cells

Economically synthesized NiCo2S4/TiO2 with high reflectance ability as the counter electrode to replace Pt for dye-sensitized solar cells