Abstract:In this work, a nanoporous array anodic titanium was selected as a fiber substrate because of its high surface-to-volume ratio, easy preparation, mechanical stability, and rich titanol groups on its surface that can anchor other active groups. Then, a polymerizable ionic liquid monomer pair, (1-vinyl-3-hexadecylimidzolium)-(p-styrenesulfonate) ([C(16)VIm]+SS-), was synthesized and used for the chemical modification of the mercaptopropyl-functionalized nanoporous anodic titania support using a surface radical chain-transfer addition. A homogeneous and porous coating with a thickness of about 7 mu m was achieved. The main advantage of this copolymerization method over the conventional single-ion polymerization is its high stability under harsh conditions, like high temperatures, as well as acidic, alkaline and high ionic strength solutions. Combined with gas chromatography-a flame ionization detection (GC-FID), the poly[C(16)VIm]+SS- was used as a sorbent material for the direct immersion SPME of four types of compounds, including polycyclic aromatic hydrocarbons, hydrophobic phenols, nonvolatile phthalate esters and parabens, in an aqueous solution. The analytical performance of the proposed method was investigated under the optimum extraction conditions (content of NaCl, 20% (w/v); extraction temperature, 70 degrees C; and extraction time, 55 min). Calibration ranges were 0.1-400 mu g L-1 for four hydrophobic phenols, anthracene (Ant) and fluoranthene (Flt), 0.15-600 mu g L-1 for dibutyl phthalate (DBP) and di-(2-ethyl-hexyl) phthalate (DEHP), and 0.5-2000 mu g L-1 for ethylparaben (EPN) and propylparaben (PPN). The as-established method showed good linearity with good correlation coefficients (R = 0.993-0.999) and low detection limits in the range of 0.003 to 0.156 ng mL(-1) (S/N = 3). In addition, the poly[C(16)VIm]+SS- -SPME fiber showed good precision (3.2-13.5%) and repeatability between fiber and fiber (9.1-19.6%). Finally, soil extract sample were analyzed and satisfactory results were obtained.

Preparation of Durable Graphene-Bonded Titanium Fibers for Efficient Microextraction of Phthalates from Aqueous Matrices and Analysis with Gas Chromatography–mass Spectrometry

Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO₂ nanoparticles on a stainless steel fiber

Facile Synthesis and Evaluation of Three Magnetic 1,3,5-Triformylphloroglucinol Based Covalent Organic Polymers As Adsorbents for High Efficient Extraction of Phthalate Esters from Plastic Packaged Foods

Polyethylene glycol/graphene oxide coated solid-phase microextraction fiber for analysis of phenols and phthalate esters coupled with gas chromatography.

Graphene Reinforced Hollow Fiber Liquid-Phase Microextraction for the Determination of Phthalates in Water, Juice and Milk Samples by HPLC

Graphene-dispersive solid-phase extraction of phthalate acid esters from environmental water.

Electrospun nanofibers-based thin film microextraction for enrichment of phthalate esters in biodegradable plastics

Thermally Stable Ionic Liquid-Based Sol–gel Coating for Ultrasonic Extraction–solid-Phase Microextraction–gas Chromatography Determination of Phthalate Esters in Agricultural Plastic Films

Graphene Nanoplatelets As a Highly Efficient Solid-Phase Extraction Sorbent for Determination of Phthalate Esters in Aqueous Solution.

Silicon dioxide–poly(dimethylsiloxane) with a bilayer structure, incorporating multi-walled carbon nanotubes, supported on stainless steel wire as a solid-phase microextraction fiber for the determination of trace phthalate esters in drinking water samples

Octadecyl-fibrous Mesoporous Silica Nanospheres Coated 96-Blade Thin-Film Microextraction for High-Throughput Analysis of Phthalic Acid Esters in Food and Migration from Food Packages

Fabrication of magnetic microsphere-confined graphene for the preconcentration of some phthalate esters from environmental water and soybean milk samples followed by their determination by HPLC.

Phytic acid induced three-dimensional graphene for the enrichment of phthalate esters from bottled water and sports beverage samples

A porous carbon derived from amino-functionalized material of Institut Lavoisier as a solid-phase microextraction fiber coating for the extraction of phthalate esters from tea.

Magnetic Covalent Triazine Framework for Rapid Extraction of Phthalate Esters in Plastic Packaging Materials Followed by Gas Chromatography-Flame Ionization Detection

Preparation of Nanoporous Array Anodic Titanium Wire Supported Solid-Phase Microextraction Fiber Coated with A Copolymerized Polymerizable Ionic Liquid Monomer Pair

Facile fabrication of carbon nanotube hollow microspheres as coating fiber for ultrasensitive solid-phase microextraction of phthalate acid esters in tea beverages

Preparation and evaluation of graphene-coated solid-phase microextraction fiber.

Preparation of polypyrrole-coated magnetic particles for micro solid-phase extraction of phthalates in water by gas chromatography-mass spectrometry analysis.

Ethane-bridge periodic mesoporous organosilica materials as a novel fiber coating in headspace solid-phase microextraction of phthalate esters from saliva and PET container samples

Electrochemical Preparation of Poly(3-Methylthiophene-Carbazole)/Graphene Oxide Composite Coating for the Highly Effective Solid-Phase Microextraction of Some Fragrance