Abstract:Hydrogen represents a promising renewable fuel, and its broad application can lead to drastic reductions in greenhouse gas emissions. Keeping hydrogen in liquid form helps achieve high energy density, but also requires cryogenic conditions for storage as hydrogen evaporates at temperatures of about 20 K, which can lead to a large pressure build-up in the tank. This paper addresses the unsteady thermal modeling of cryogenic tanks with liquid hydrogen. Considering the liquid and vapor phases in the tank as two nodes with averaged properties, a lumped-element method of low computational cost is developed and used for simulating two regimes: self-pressurization (also known as autogenous pressurization, or pressure build-up in the closed tank due to external heat leaks) and constant-pressure venting (when some hydrogen is let out of the tank to maintain pressure at a fixed level). The model compares favorably (within several percent for pressure) to experimental observations for autogenous pressurization in a NASA liquid hydrogen tank. The two processes of interest in this study are numerically investigated in tanks of similar shapes but different sizes ranging from about 2 to 1200 m3. Pressure and temperature growth rates are characterized in closed tanks, where the interfacial mass transfer manifests initial condensation followed by more pronounced evaporation. In tanks where pressure is kept fixed by venting some hydrogen from the vapor domain of the tank, the initial venting rate significantly exceeds evaporation rate, but after a settling period, magnitudes of both rates approach each other and continue evolving at a slower pace. The largest tank demonstrates a six-times-lower pressure rise than the smallest tank over a 100 h period. The relative boil-off losses in continuously vented tanks are found to be approximately proportional to the inverse of the tank diameter, thus generally following simple Galilean scaling with a few percent deviation due to scale effects. The model developed in this work is flexible for analyzing a variety of processes in liquid hydrogen storage systems, raising efficiencies, which is critically important for a future economy based on renewable energy.

Effect of storage conditions on the characteristics of cryogenic hydrogen jet dispersion

Temperature Effects of Composite High Pressure Hydrogen Storage Cylinders in the Rapid Hydrogen Charging and Discharging Process

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Prediction of Dormancy Time of Cryo-Compressed Hydrogen Tank by Considering Dynamic Thermal Boundary

Modeling of cryogenic hydrogen releases

A computational analysis of cryogenic hydrogen release under various conditions

Concentration Fluctuations and Flammability of Cryo-Compressed Hydrogen and Methane Jets

Simulation of small-scale releases from liquid hydrogen storage systems

Dynamic Thermal Performance of Cryogenic Liquid Hydrogen Heating from Gas-Liquid Stratification to Supercritical under a Constant Heat Flux Condition: A Two-Step Simulation

A numerical study of hydrogen leakage and diffusion in a hydrogen refueling station

Modeling of Cryogenic Compressed Hydrogen Jet Flames

Numerical Simulation of Hydrogen Release from High-Pressure Storage Vessel

A numerical study of unintended hydrogen release in a hydrogen refueling station

Experimental and computational fluid dynamic investigation on thermal behaviors of liquid hydrogen during the no-vented storage process: A literature review

The effects of low-temperature phenomena on rapid phase transition of liquid hydrogen

Study of key parameters in modeling liquid hydrogen release and dispersion in open environment

Study of the influence of different ignition times on detonation generation and shock wave propagation in high-pressure hydrogen leakage

Numerical Simulation on Pressure Evolution Process of Liquid Hydrogen Storage Tank with Active Cryogenic Cooling

Perspective for the Safe and High-Efficiency Storage of Liquid Hydrogen: Thermal Behaviors and Insulation

Safety of hydrogen storage and transportation: An overview on mechanisms, techniques, and challenges

The Effect of Liquid Hydrogen Tank Size on Self-Pressurization and Constant-Pressure Venting