Abstract:Flexible droplet preparation and manipulation are significant for lots applications such as immunoreaction and monocellular culture. Herein, we present a novel method for effective on-chip droplet generation, splitting and switching via controllable hydrodynamics. The microchannel of the designed chip has 6 inlets and 3 three outlets. The water solution is injected from a specific inlet (inlet d), and the other 5 inlets are used to inject oil fluids. Under the shearing effect of immiscible oils, the water phase breaks into dispersed droplets first, and the generated droplets can be further split into daughter drops or switched into side outlets from the middle outlet. To investigate the hydrodynamic droplet manipulation behaviors, a two-dimensional simulation model based on phase-field method is established. Utilizing the computational model, we systematically analyze the influences of the flow rates of continuous and dispersed fluids and the manipulation modes on droplet generation, splitting and switching. The numerical results indicate that the droplets can be generated with controlled sizes. For instance, at Qd = 5 μL/min and Qc1,2 = 5 μL/min, the droplet diameter decreases from 89.2 μm to 49.2 μm as Qs1,2 gradually rises from 15 μL/min to 40 μL/min. Moreover, the prepared droplets can realize on-demand splitting and switching. When Qd, Qc1,2, and Qs1,2 are fixed at 5 μL/min, 5 μL/min and 25 μL/min, respectively, the generated droplet is split into different proportional daughter drops with the rising of Qs3 (or Qs4) at first, and finally it is switched into the side-outlets when Qs3 (or Qs4) is higher than 80 μL/min. Therefore, this proposed droplet manipulation approach will be promising for various applications, and the numerical simulations can provide useful guidelines on the design and operation of droplet-based microfluidic systems.

Splitting a droplet for femtoliter liquid patterns and single cell isolation.

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Droplet Precise Self‐Splitting on Patterned Adhesive Surfaces for Simultaneous Multidetection

Droplets microfluidics platform—A tool for single cell research

Generation of Sub-Femtoliter Droplet by T-Junction Splitting on Microfluidic Chips

Multifunctional picoliter droplet manipulation platform and its application in single cell analysis.

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Flexible On-Chip Droplet Generation, Switching and Splitting Via Controllable Hydrodynamics

On-Chip Droplet Splitting with High Volume Ratios Using a 3D Conical Microstructure-Based Microfluidic Device

An Integrated Microfluidic Device for Droplet Manipulation

T-junction splitting of droplets from nanoliter to femtoliter and manipulation of single nanoparticles on microfluidic chips

Femtosecond Laser-Scribed Superhydrophilic/superhydrophobic Self-Splitting Patterns for One Droplet Multi-Detection.

Manipulating Femtoliter to Picoliter Droplets by Pins for Single Cell Analysis and Quantitative Biological Assay.

Light Fueled High-Throughput Binary Droplet Splitting and Transport on High-Energy Substrate.

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Picoliter Droplet Array Based on Bioinspired Microholes for in Situ Single-Cell Analysis

Droplet-Based Microfluidic Device for Multiple-Droplet Clustering

Designing Laplace Pressure Pattern for micro-Droplet Manipulation.

Comprehensive Two-Dimensional Manipulations of Picoliter Microfluidic Droplets Sampled from Nanoliter Samples.

Smearing Observation of Picoliter Droplets Pinning on Bio-Inspired Negative Lotus Leaf Replicas

A Single-Cell Encapsulation Method Based on a Microfluidic Multi-Step Droplet Splitting System