Abstract:Abstract 4D printing, as an emerging technology, fabricates structures with smart materials which deform under stimuli. The bilayer structure is special in 4D printing that has lots of capabilities such as self-folding. The prediction of bilayer structure deformation in the design phase is very important to meet the application requirements better. However, there has been little research on simulating the self-deformation of 4D printed bilayer structures before fabricating and most of these studies only consider the bending of bilayer plates. In our work, a common model is proposed which can simulate the complicated self-deformation of 4D printed bilayer structures. Firstly, the deformation reason of 4D printed bilayer structures is analyzed and the mismatch of the two layers in a bilayer structure is modeled with a simplified energy density function. Secondly, a reduced bilayer plate model proposed by Bartels is introduced and improved by considering the different anisotropic expansions of each layer. Under this model, the deformation simulating of the bilayer plate is transformed into an energy minimization problem. Thirdly, the optimization problem is solved using the numerical iterative scheme established by Bartels and the deformation process of the simulated bilayer plate is also visualized. Lastly, some numerical simulations on bending, twisting, and ringing deformations of bilayer structures are conducted and compared with the corresponding experiments based on thermal-driven PLA bilayer structures and the results verify the validity of this common simulating model. This method also has the advantages of high efficiency and good convergence by simplifying the simulation into a 2D problem and avoiding contact analysis. This work provides a new view for predicting the deformation of 4D printed bilayer structures which we think is highly significant.

Active Printed Materials for Complex Self-Evolving Deformations

Modular 4D Printing Via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks

Computational Design of Active 3D-Printed Multi-State Structures for Shape Morphing

4DMesh: 4D Printing Morphing Non-Developable Mesh Surfaces.

Active Origami by 4d Printing

Computational design of 4D printed shape morphing lattices undergoing large deformation

A Common Simulating Model on Complicated Self-Deformation of 4D Printed Bilayer Structures

Inverse Design Tool for Asymmetrical Self-Rising Surfaces with Color Texture.

MultiPneu: Inflatable Deformation of Multilayered Film Materials

Design Synthesis of a 4D-Printed Self-Tying Knot with Programmable Morphology

Computational Design of Self-Actuated Deformable Solids via Shape Memory Material

4D Printed Self-Helix Structure Based on Internal Stress Reversibility

Growing and Evolving 3D Prints

MorphingCircuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics.

Multi-shape Active Composites by 3D Printing of Digital Shape Memory Polymers.

3Dp-Ori: Bridging-Printing Based Origami Fabrication Method with Modifiable Haptic Properties

Programmable multistability for 3D printed reinforced multifunctional composites with reversible shape change

Shape-shifting structured lattices via multimaterial 4D printing

4D Printing of Adaptable "Living" Materials Based on Alkoxyamine Chemistry

Bio-Inspired 4D-Printed Mechanisms with Programmable Morphology

Encoding of direct 4D printing of isotropic single-material system for double-curvature and multimodal morphing