Abstract:Water pollution caused by the excessive growth of blue-green algae has become a growing environmental problem. One current approach to reducing the algae in Taihu Lake is to refloat the algae after a bloom has occurred. It can remove nitrogen and phosphorus in the lake simultaneously. The amount of algae-laden water collected from Taihu Lake can be up to approximately several thousand tons in wet weight per day. And they needs timely and effective treatment. The algae can be effectively degraded and produced into methane by anaerobic fermentation technology. The algae is easy to float and crust in the reactor, thus affecting the efficiency of the gas production and reducing the processing effect of the reactor. In anaerobic reactors, proper stirring can prevent algae floating and facilitate contact between the algae and other microbes, thereby improving gas production efficiency. This paper designed experimental device for optimizing the stirring of blue-green algae anaerobic fermentation. The device was made of double transparent glass with a working volume of 3 L. The device was equipped with an adjustable speed motor, which control the stirring interval, stirring duration and stirring cycle. Response surface methodology (RSM) was employed to optimize the stirring conditions. Simultaneously, the pilot study was adopted to provide a support of the best stirring condition of blue-green algae anaerobic fermentation. In the pilot study, protease content was assayed to characterize hydrolysis activity, TTC-dehydrogenase content was measured to characterize microbial enzyme activity, and coenzyme F420 content showed the activity of methanogenic anaerobes. The experimental results showed that the algae anaerobic fermentation was influenced by stirring interval, stirring duration, and stirring cycle. The correlation coefficient of the RSM regression equation was 0.98. RSM revealed the optimized stirring parameters for algae anaerobic fermentation as follows:Stirring intensity 56 r/min, stirring duration 20 min, and stirring cycle 6 h. Under these conditions, the proportional rates of gas and methane production in the pilot study were maximized at 0.39 and 0.236 L/(g·d), respectively. It was demonstrated that RSM methodology could be applied to the stirring process in larger-scale algae anaerobic fermentation reactors. Levels of protease, dehydrogenase, and coenzyme F420 were higher in optimized stirring parameters than other conditions. Stirring intensity was the main factor affecting biogas production by anaerobically fermenting algae. Stirring cycle exerted a secondary effect, while the effect of stirring duration was minor. Excessively intense and frequent stirring destroy the micro-environment of anaerobic microbial growth, partially disrupting the synergy between different anaerobic species. Conversely, an excessively weak stirring or prolonged stirring cycle lead to float of algae in the reactor, forming an upper algal layer. And the algal layer hinder the discharge of gas from the reactor. Meanwhile, less effective contact between algae and the microbes leads to the decrease of algae degradation rate.

Stirring Rate Regulates the Proliferation and Metabolism of Microencapsulated Recombinant CHO Cells

Growth and production of microencapsulated recombinant CHO in a stirred tank bioreactor

Optimization of Condition for Culture of CHO Cells by Tubespin,a Disposable High-throughput Bioreactor

Bench-Scale Stirred-Tank Bioreactor for Recombinant Protein Production in Chinese Hamster Ovary (CHO) Cells in Suspension

Impact of hydromechanical stress on CHO cells' metabolism and productivity: Insights from shake flask cultivations with online monitoring of the respiration activity

Preparation and Cultivation of Icroencapsulated Recombinant CHO Cells

Improved Recombinant Protein Production by Regulation of Transcription and Protein Transport in Chinese Hamster Ovary Cells.

Rapid Large-Scale Culturing of Microencapsulated Hepatocytes: a Promising Approach for Cell-Based Hepatic Support.

Enhancing productivity of Chinese hamster ovary (CHO) cells: synergistic strategies combining low-temperature culture and mTORC1 signaling engineering

CHO stable pool fed‐batch process development of SARS‐CoV‐2 spike protein production: Impact of aeration conditions and feeding strategies

Chemical and Genetic Modulation of Complex I of the Electron Transport Chain Enhances the Biotherapeutic Protein Production Capacity of CHO Cells

A comprehensive comparison of mixing and mass transfer in shake flasks and their relationship with MAb productivity of CHO cells

Exploring Metabolic Responses and Pathway Changes in CHO-K1 Cells under Varied Aeration Conditions and Copper Supplementations Using 1H NMR-based Metabolomics

Enhanced Production of Microalgal Metabolites Through Aeration Coupled with Stirring

Ex Vitro Expansion of Human Placenta-Derived Mesenchymal Stem Cells in Stirred Bioreactor

Optimization of mechanical stirring technology in anaerobic fermentation treating algae and pilot trial validation

Factors Affecting the Expression of Recombinant Protein and Improvement Strategies in Chinese Hamster Ovary Cells

Effects and mechanism of small molecule additives on recombinant protein in CHO cells

CHO cell engineering via targeted integration of circular miR-21 decoy using CRISPR/RMCE hybrid system

Effects of in vitro culture and cryopreservation on microencapsulated recombinant cell growth and endostatin production

Growth and Metabolism of rCHO Cells in Glucose-Limited Fed Batch Culture