Abstract:Graphene-gold nanohybrids have become a hot research topic in material science, because the hybridization can be an effective strategy to enhance the functionality of materials and the integration of nanomaterials on graphene nanosheets potentially paves a new way to improve their electronic, chemical and electrochemical properties. The study reported a novel graphene-gold nanohybrid with excellent electrocatalytic performance for electrochemical detection of glucose. First, the monodisperse gold nanoparticles (GNs) were prepared via the citrate reduction associated with pH-shifting. The resulting GNs give an average particle size of 6 nm and narrow size distribution. Then, one part of the GN solution was mixed with the graphite oxide solution, which followed by the ascorbic acid reduction and unidirectional freeze-drying to prepare graphene aerogel@GNs (GA@GNs). The formed GA@GNs offers a well-defined three-dimensional and orientated porous structure. In addition, the most of GNs in the aerogel was embedded in the intertwined graphene sheets. Finally, another part of the GN solution was sucked into the GA@GNs to obtain GA@GNs/GNs. It was subjected to freeze-drying and thermal annealing in air at 180 degrees C to remove the citrate modified on the surface of GNs. Because their active sites were well exposed outside, the adsorbed GNs are of high catalytic activity. The study shows that the as-prepared GA@GNs/GNs gives high electrical conductivity (15.4 S m(-1)), specific surface area (291.6 m(2) g(-1)) and apparent heterogeneous electron transfer rate constant (14.8 +/- 0.12 cm s(-1)). The sensor based on the GA@GNs/GNs displays ultrasensitive electrochemical response to glucose, owing to largely enhanced electron transfer, mass transport and catalytic activity. Its peak current linearly increases with the increase of glucose in the range from 0.01 to 16 mM with the detection limit of 0.004 mM (S/N = 3). The analytical method presents the advantage of sensitivity, repeatability and stability compared with present glucose sensors. It has been successfully applied in the detection of glucose in serum samples with the spiked recovery of 95.7-104.2%. The study also provides a promising approach for building on various graphene-metal nanohybrids with excellent electrochemical performance for sensing, catalysis and energy storage/conversion devices. (C) 2014 Elsevier B.V. All rights reserved.

Assembly of Graphene and Nickel Nanoparticles on Anion Exchange Resin Microspheres for the Amperometric Detection of Carbohydrates in Combination with Capillary Electrophoresis.

Embedment of Well Dispersed Nickel Nanoparticles in Sulfonate and Benzimidazole Functionalized Poly (arylene Ether Ketone) Film for the Electrocatalytic Oxidation of Glucose

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

Development of glucose biosensors based on nanostructured graphene-conducting polyaniline composite.

3D Porous Structured Polyaniline/reduced Graphene Oxide/copper Oxide Decorated Electrode for High Performance Nonenzymatic Glucose Detection

Facile Assembly of Graphene on Anion Exchange Resin Microspheres for Electrochemical Sensing and Biosensing.

Fabrication of carbon nanotube-nickel nanoparticle hybrid paste electrodes for electrochemical sensing of carbohydrates

Facile Preparation of Graphene-Copper Nanoparticle Composite by in Situ Chemical Reduction for Electrochemical Sensing of Carbohydrates

Low-cost Fabrication of Graphene Ball Electrodes for the Amperometric Detection of Capillary Electrophoresis

Magnetic loading of graphene-nickel nanoparticle hybrid for electrochemical sensing of carbohydrates.

Fabrication of graphene/poly(ethyl 2-cyanoacrylate) composite electrode for amperometric detection in capillary electrophoresis

Direct Decoration of Carbon Nanohorns with Binary Nickel-Cobalt Sulfide Nanosheets Towards Non-Enzymatic Glucose Sensing in Human Fluids

Carbon-nanotube/copper Composite Electrodes for Capillary Electrophoresis Microchip Detection of Carbohydrates

The Micro Network of Polyacrylonitrile (Pan)-Polyaniline (Pani)-Graphene (GRA) Hybrid Nanocomposites for Effective Electrochemical Detection of Glucose and Improved Stability

Ion-Exchange Chromatography with Electrochemical Detection Using Copper Nanoparticles/Graphene Composite Film Modified Electrode for Determination of Monosaccharide

Fabrication of Graphene Aerogel/Platinum Nanoparticle Hybrids for the Direct Electrochemical Analysis of Glucose

Preparation of a carbon nanotube-copper nanoparticle hybrid by chemical reduction for use in the electrochemical sensing of carbohydrates

Simultaneous Electrochemical Detection of Ascorbic Acid, Dopamine and Uric Acid Based on Graphene Anchored with Pd–Pt Nanoparticles

Fabrication of graphene/poly(methyl methacrylate) composite electrode for capillary electrophoretic determination of bioactive constituents in Herba Geranii.

Simultaneous Determination of Ascorbic Acid, Dopamine and Uric Acid Using High-Performance Screen-Printed Graphene Electrode.

Novel Graphene-Gold Nanohybrid with Excellent Electrocatalytic Performance for the Electrochemical Detection of Glucose