Abstract:Wind turbines (WT) are steadily growing in size to increase their power production, which also causes increasing loads acting on the turbine's components. At the same time large structures, such as the blades and the tower get more flexible. To minimize this impact, the classical control loops for keeping the power production in an optimum state are more and more extended by load alleviation strategies. These additional control loops can be unified by a multiple-input multiple-output (MIMO) controller to achieve better balancing of tuning parameters. An example for MIMO control, which has been paid more attention to recently by wind industry, is Model Predictive Control (MPC). In a MPC framework a simplified model of the WT is used to predict its controlled outputs. Based on a user-defined cost function an online optimization calculates the optimal control sequence. Thereby MPC can intrinsically incorporate constraints e.g. of actuators. Turbine models used for calculation within the MPC are typically simplified. For testing and verification usually multi body simulations, such as FAST, BLADED or FLEX5 are used to model system dynamics, but they are still limited in the number of degrees of freedom (DOF). Detailed information about load distribution (e.g. inside the gearbox) cannot be provided by such models. In this paper a Model Predictive Controller is presented and tested in a co-simulation with SlMPACK, a multi body system (MBS) simulation framework used for detailed load analysis. The analysis are performed on the basis of the IME6.0 MBS WT model, described in this paper. It is based on the rotor of the NREL 5MW WT and consists of a detailed representation of the drive train. This takes into account a flexible main shaft and its main bearings with a planetary gearbox, where all components are modelled flexible, as well as a supporting flexible main frame. The wind loads are simulated using the NREL AERODYN v13 code which has been implemented as a routine to SlMPACK. This modeling approach allows to investigate the nonlinear behavior of wind loads and nonlinear drive train dynamics. Thereby the MPC's impact on specific loads and effects not covered by standard simulation tools can be assessed and investigated. Keywords. wind turbine simulation, model predictive control, multi body simulation, MIMO, load alleviation

Distributed Model Predictive Control of a Wind Farm for Optimal Active Power ControlPart II: Implementation with Clustering-Based Piece-Wise Affine Wind Turbine Model

Equivalent modelling of the DDPMSG-based wind farm based on action time clustering of limiting component

Optimal Active Power Control of a Wind Farm Equipped with Energy Storage System Based on Distributed Model Predictive Control

Distributed Model Predictive Control of a Wind Farm for Optimal Active Power ControlPart I: Clustering-Based Wind Turbine Model Linearization

Model Predictive Control of a Solar Power System with Microturbine and Thermochemical Energy Storage

A Survey on Model Predictive Control of DFIGs in Wind Energy Conversion Systems

Hierarchical Cluster Coordination Control Strategy for Large-scale Wind Power Based on Model Predictive Control and Improved Multi-time-scale Active Power Dispatching

Model Predictive Control- Based Wind Farm Power Control with Energy Storage

Model Predictive Control-Based Coordinated Control Algorithm with a Hybrid Energy Storage System to Smooth Wind Power Fluctuations

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Distributed Model Predictive Control Strategy Based on Block‐wised Alternating Direction Multiplier Method for Microgird Clusters

Two-stage ADMM-based Distributed Optimal Reactive Power Control Method for Wind Farms Considering Wake Effects

Distributed Power Optimization of Large Wind Farms Using ADMM for Real-Time Control

Model Predictive Control Based Coordinated Voltage Control for Offshore Radial DC-connected Wind Farms

A Novel Adaptive Model Predictive Control Strategy for DFIG Wind Turbine with Parameter Variations in Complex Power Systems

Model predictive direct power control of doubly-fed wind power generation system

Dual-stage MPC-based AGC for Wind Farm Considering Aerodynamic Interactions

Distributed Economic Model Predictive Load Frequency Control for the Multiarea Interconnected Power System With WTs

A Distributed Model Predictive Wind Farm Controller for Active Power Control

Model predictive control of a wind turbine modelled in Simpack

Distributed Supervisory Predictive Control of Distributed Wind and Solar Energy Systems.