Abstract:Silicon is an attractive anode material for lithium-ion batteries. However, silicon anodes have the issue of volume change, which causes pulverization and subsequently rapid capacity fade. Herein, we report organic binder and conducting diluent-free silicon-carbon 3D electrodes as anodes for lithium-ion batteries, where we replace the conventional copper (Cu) foil current collector with highly conductive carbon fibers (CFs) of 5-10 μm in diameter. We demonstrate here the petroleum pitch (P-pitch) which adequately coat between the CFs and Si-nanoparticles (NPs) between 700 and 1000 °C under argon atmosphere and forms uniform continuous layer of 6-14 nm thick coating along the exterior surfaces of Si-NPs and 3D CFs. The electrodes fabricate at 1000 °C deliver capacities in excess of 2000 mA h g-1 at C/10 and about 1000 mA h g-1 at 5 C rate for 250 cycles in half-cell configuration. Synergistic effect of carbon coating and 3D CF electrode architecture at 1000 °C improve the efficiency of the Si-C composite during long cycling. Full cells using Si-carbon composite electrode and Li1.2Ni0.15Mn0.55Co0.1O2-based cathode show high open-circuit voltage of >4 V and energy density of >500 W h kg-1. Replacement of organic binder and copper current collector by high-temperature binder P-pitch and CFs further enhances energy density per unit area of the electrode. It is believed that the study will open a new realm of possibility for the development of Li-ion cell having almost double the energy density of currently available Li-ion batteries that is suitable for electric vehicles.

A Novel Silicon/Carbon Nanocomposite Anode for High Performance Lithium-Ion Micro-Battery

Silicon Nanoparticles Within the Carbonized SU-8 Cages As A Micro Lithium-Ion Battery Anode

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

A Novel Anode in High-Performance Lithium-Ion Battery Based on Advanced Nanomaterials and Nanofabrication Technology

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Rational Design of Three-Dimensional Macroporous Silicon As High Performance Li-ion Battery Anodes with Long Cycle Life

A Hollow Silicon Nanosphere/Carbon Nanotube Composite as an Anode Material for Lithium-Ion Batteries

Nano-Si/graphite/N-doped biocarbon hybrid anode material for high-performance lithium-ion batteries

Micro-sized nano-porous Si/C anodes for lithium ion batteries

High Recyclability and Power Performance of a Thin Micro Lithium-Ion Battery Anode

Nanostructured Silicon-Carbon 3D Electrode Architectures for High-Performance Lithium-Ion Batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Rational-design micro-nanostructure of porous carbon film/silicon nanowire/graphite microsphere composites for high-performance lithium-ion batteries

Synthesis of Robust Silicon Nanoparticles@Void@Graphitic Carbon Spheres for High‐Performance Lithium‐Ion‐Battery Anodes

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery.

Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

Si/C Composite Embedded Nano-Si in 3D Porous Carbon Matrix and Enwound by Conductive CNTs As Anode of Lithium-Ion Batteries

Low-Cost Micron-Scale Silicon-Based Anodes for High-Performance Lithium-Ion Batteries

A Novel Strategy for Lithium-Ion Battery Anode with Enhanced Cycling Performance: Silicon Particles Enclosed in Shell-Like Mxenes/CNTs Nanostructure