Abstract:The calculation of main circuit parameters is an important constituent part in the design of HVDC transmission projects. Each pole of the ±800 kV 7500 MW DC power transmission project from Xiluodu to Zhexi is composed of two series connected 12-pulse converters, thus the operation modes of the DC transmission project can be flexibly regulated. According to the theory of UHVDC power transmission and the features of DC system, main circuit parameters of the DC transmission project is studied and designed. Following main design parameters of converter stations at both ends of the DC transmission project are obtained from the calculation results: inductance of smoothing reactor for each pole of each station is 4×75 mH, this 4×75 mH inductance is splitted into two equal parts, one part is connected to pole bus and the other is connected to neutral bus; the converter transformers are composed of single-phase two-winding transformers, at Xiluodu side the rated capacity of each single-phase transformer is 378.5 MVA and its rated phase voltage is 171.3 kV and at Zhexi side the rated capacity of each single-phase transformer is 358.4 MVA and its rated phase voltage is 162.2 kV, the short-circuit impedances of converter transformer are 19% for both ends of the project while the tap changer is not adjusted; the number of transformer taps is set to +21/-6 at Xiluodu side and +24/-4 at Zhexi side, and voltage difference between two adjacent taps is 1.25% of the rated votlage at both sides; the absolute maximum no-load DC voltage 239.0 kV at Xiluodu side and 227.0 kV at Zhexi side. These data can be used as the foundation for subsequent research item of this project and is available for reference to other UHVDC transmission projects.

DC-Side Harmonic Currents Calculation and DC-Loop Resonance Analysis for an LCC–MMC Hybrid HVDC Transmission System

Calculation of DC Side Harmonic Currents for LCC-MMC Hybrid HVDC Transmission System

Analysis of Coupling Effect on LCC-MCC Hybrid HVDC from Parallel AC Lines in Close Proximity

Research on Transmission Line Model Based on Phase‐mode Transformation in HVDC System

Electromechanical Transient Modeling of Line Commutated Converter-Modular Multilevel Converter-Based Hybrid Multi-Terminal High Voltage Direct Current Transmission Systems

Power Flow Calculation for AC/DC Power Systems with Line-Commutated Converter–Modular Multilevel Converter (LCC-MMC) Hybrid High-Voltage Direct Current (HVDC) Based on the Holomorphic Embedding Method

Study on Main Circuit Configuration and Control Modes for a New LCC-MMC Hybrid HVDC System

A new approach for suppressing DC voltage ripples of MMC-HVDC

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

An LCC-MMC hybrid cascaded inverter applicable for UHVDC power overhead line transmission and dynamic reactive power self-compensation

Control Strategies for LCC-MMC Hybrid DC System Connected to Passive Networks

Impedance Modeling and Analysis of Series-connected Modular Multilevel Converter (MMC) and its Comparative Study with Conventional MMC for HVDC Applications

Electromechanical Transient Modeling and Control Strategy of Decentralized Hybrid HVDC Systems

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Overcurrent mechanism and suppression control for MMC arms in hybrid cascaded HVDC system

Research on power transmission enhancement strategy of LCC-MMC hybrid HVDC system under AC symmetric fault

Calculation of AC Side Harmonics for MTDC Transmission Systems and AC Filters Design

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

LCC-HVDC System Dynamic Phasor Modeling Based on Improved Switch Function

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

A practical impedance modeling method of MMC-HVDC transmission system for medium- and high-frequency resonance analysis