Abstract:In recent times, MoNbTaW Refractory High Entropy Alloys (RHEAs) have drawn attention due to their exciting high-temperature applications and efforts are being made to improve their properties further. Alloying addition is an effective and practical approach to enhancing material properties. Ti is well known for its strength, low density, and corrosion resistance and its role in the properties of MoNbTaW-based RHEAs is required to be understood. RHEAs are commonly synthesized by vacuum arc melting (VAR) process and micro-segregation of the elements is reported. However, the effect of micro-segregation on MoNbTaW RHEAs is not well understood. Hence, the present work deals with the addition of Ti and micro-segregation on the structure, microstructure, and indentation behavior of MoNbTaW RHEAs. A novel non-equiatomic MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs were prepared by vacuum arc melting (VAR) process. The structure and microstructure of these RHEAs were ascertained through X-ray diffraction (XRD) and transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with EDS for ascertaining the nominal chemical composition. The as-cast MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs contains two BCC phase having slightly different lattice parameter i.e., BCC1 (a = 0.324 nm) and BCC2 (a = 0.323 nm) close to Ti and W respectively. These as-cast RHEAs having dendritic and inter-dendritic regions were found to be enriched in W and Ta, and Mo, Nb and Ti respectively. The microhardness of these RHEAs was investigated through instrumented indentation techniques. The microhardness of the BCC1 and BCC2 phases was found to be ∼4.5 GPa and 5.7 GPa. Further, the influence of Ti addition on the structure, elastic constant, and microhardness were estimated from the perspective of the first principle approximation. The special quasi-random structure (SQS) was used for first-principle calculations. The strengthening mechanisms influencing the mechanical properties in these BCC RHEAs were discussed in details. The experimental results were in good agreement with the results pertaining to theoretical modelling, demonstrating the effectiveness of these methods in predicting the structure and mechanical properties of RHEAs.

Effect of W/Mo ratio on the as-cast microstructure of Nb-modified Hastelloy N alloys

Effects of Mo Addition on Microstructure of a 4th Generation Ni-based Single Crystal Superalloy

Effect of W/Mo ratio on the microstructure of Ni-Mo-W-Cr-Nb based superalloys after thermal exposure

Effects of Mo and Nb on the microstructure and high temperature oxidation behaviors of CoCrFeNi-based high entropy alloys

Effect of Mo on microstructural stability of a 4th generation Ni-based single crystal superalloy

Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel

Effects of Mo on microstructure and mechanical properties of Fe2Ni2CrMox eutectic high entropy alloys

Unveiling the Mo effect on the microstructural stability of L1 2 -strengthened chemically complex alloys

Effect of Mo on the Mechanical and Corrosion Behaviors in Non-Equal Molar AlCrFeMnNi BCC High-Entropy Alloys

Effect of substituting Mo for W on γ/γ′ partitioning behaviors of alloying elements in heat-treated second generation Ni based single crystal superalloys: An atom probe tomography study

Effect of Mo on the morphology, microstructure and mechanical properties of NbTa 0.5 TiMo x refractory high entropy alloy fabricated by laser powder bed fusion using elemental mixed powders

Effect of Mo and Nb on mechanical properties and hydrogen embrittlement of hot-rolled medium-Mn steels

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

EFFECT OF MOLYBDENUM ON DELAYED FRACTURE BEHAVIOR OF HIGH STRENGTH STEEL

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Effect of alloying elements on the structure and mechanical properties of NbMoTaWX (X = Cr, V, Ti, Zr, and Hf) refractory high-entropy alloys

Influence of micro-segregation on the microstructure, and microhardness of MoNbTaxTi(1-x)W refractory high entropy alloys: Experimental and DFT approach

Microstructure and segregation behaviour of directionally solidified tungsten bearing 25Cr-35Ni-Nb heat-resistant stainless steels

Effect of Mo doping on the microstructure and properties of an Fe36Ni Invar alloy

Effect of Mo Addition on Tribological Properties of Al19Fe20-xCo20-xNi41 Mo2x Eutectic High-Entropy

Effects of Cr and W in TiMoNb Refractory High Entropy Alloys