Abstract:Dihydrogen (H2) is considered nowadays as a sustainable energy carrier and exhibits a high energy density in its highly compressed state. Different countries in the world are developing industrial production and are scaling up water electrolysis processes with clear roadmaps. Alkaline water electrolysis is an affordable technology that avoids the use of platinum group metals with a good compromise of efficiency because of the development of new cost-effective and Earth-abundant materials of electrodes and new anion-exchange membranes. Here, we report on the use of emerging and selective laser melting (SLM) technology for the three-dimensional (3D) printing of binary alloyed NiFe, NiMo, NiCr, and NiCo electrode materials at an applied scale. These materials are preliminarily tested for hydrogen and oxygen evolution half-reactions in alkaline conditions to select the most promising combinations of cathode/anode combinations for overall water electrolysis. On the basis of three key performance metrics (KPMs, namely, overpotential values at 10 and 50 mA cm–2 and the stability in operation over 6 days at 50 mA cm–2), NiCr and NiCo are preferred for the cathode, whereas the anode is NiMo or NiFe. Moreover, to facilitate the release of the electrogenerated gas bubbles, the patterning of 3D-printed electrodes with either roughly conical holes or ramps is considered as a third experimental factor. The water electrolysis process is then fully optimized using the formalism of design of experiments (DOE), which allows to reduce the number of experiments without loss in the quality of conclusions. This study reveals that NiCo and NiMo will be preferentially used as the cathode and anode, respectively, to decrease the cell overvoltage, whereas NiFe as the anode yields the best stability in operation. Besides, the impact of the patterns printed by SLM on the KPMs is somewhat limited, even though the presence of holes is rather beneficial for decreasing cell overvoltage. Interestingly, an approximate calculation of the consumed energy for the production of 1 kg of H2 from the combination of NiCo/NiMo/holes as the cathode/anode/pattern yields 50.6 kWh/kg of H2, which is quite promising if one refers to the 48 kWh industrial target set by European Union for 2030.

An investigation of hydrogen production using 3D-printed cathodes for alkaline water electrolysis

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

Highly durable Pt@fNi(OH)2Ni cathode prepared by in situ electrodeposition method for alkaline water electrolysis

Optimization of Three-Dimensional-Printed Catalytic Electrodes for Alkaline Water Electrolysis Guided by the Experimental Design Methodology

Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production

Hydrogen Evolution Reaction Performance of Ni-Co-Coated Graphene-Based 3D Printed Electrodes

Thermal oxidation–electroreduction modified 3D NiCu for efficient alkaline hydrogen evolution reaction

One-step controllable fabrication of 3D structured self-standing Al3Ni2/Ni electrode through molten salt electrolysis for efficient water splitting

High Efficiency Electrodes for Alkaline Electrolysis of Water

Metal-based cathodes for hydrogen production by alkaline water electrolysis: Review of materials, degradation mechanism, and durability tests

Hydrogen production by traditional and novel alkaline water electrolysis on nickel or iron based electrocatalysts.

Electrocatalytic and structural investigation of trimetallic NiFeMo bifunctional electrocatalyst for industrial alkaline water electrolysis

Pd-Co-Based Electrodes for Hydrogen Production by Water Splitting in Acidic Media

High-current decoupled hydrogen and oxygen evolution via nickel–cobalt based redox mediators and bifunctional catalyst of 3D printing substrates

Non-Precious Electrodes for Practical Alkaline Water Electrolysis

Bi-metallic electrochemical deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction

Improving plasma sprayed Raney-type nickel–molybdenum electrodes towards high-performance hydrogen evolution in alkaline medium

Effects of foam cathode electrode structure on alkaline water electrolysis for hydrogen production

Ultra-low Pt-loaded catalyst based on nickel mesh for boosting alkaline water electrolysis

Electrodeposited large-area nickel-alloy electrocatalysts for alkaline hydrogen evolution under industrially relevant conditions

Enhanced Synergistic Effect by Facile Tuning of Nickel Doping on Cobalt Phosphide as Electrochemical Catalysts for Hydrogen Evolution Reaction in Alkaline Water Electrolysis