Research on Characteristics of Electro-hydraulic Servo System by Sub-chamber Independent Variable-speed Pumps Control
WANG Bo,HAO Yunxiao,QUAN Long,WANG Xiangyu,GE Lei,ZHAO Bin
DOI: https://doi.org/10.3901/jme.2020.18.235
2020-01-01
Journal of Mechanical Engineering
Abstract:：The valve-controlled servo system has fast dynamic response and high control accuracy, but there is always a large throttling loss.The pump-controlled differential cylinder system eliminates throttling losses and needs to solve the problem of asymmetric flow caused by the area difference of differential cylinder.Among them, the single-pump-controlled differential cylinder system has a simple structure and uses an auxiliary oil source to balance asymmetrical flow, but it has problems such as difficult pressure control and poor system stiffness.The double-pump-controlled differential cylinder system matches the displacement of the double pump to balance the asymmetric flow, and a double-pump coordinated control algorithm needs to be designed.For the above problems, the sub-chamber independent variable speed-pumps control differential cylinder principle is proposed.Two variable-speed open-type pumps are used to directly drive the two chambers of the differential cylinder without additional auxiliary oil source and throttling elements.It can adapt to the asymmetric flow caused by any area ratio of differential cylinder automatically.With reference to the static pressure balance characteristics of the valve control system, the sum pressure strategy of dual-pump cooperative control is designed to make the two chambers pressure sum of the hydraulic cylinder keep a constant value in the dynamic and static state, realizing the system pre-compression and leakage compensation, and improving the system stiffness.Further, the acceleration feedback is adopted to enhance system damping ratio and stability.Theoretical analysis and experimental results show that the system has good dynamic and static characteristics and the same speed gain in four quadrants, which can drive loads in four quadrants.Only a simple proportional control is used to achieve high positioning accuracy, and the control characteristics are similar to valve control systems.It's suitable for hydraulic elevator, press, injection molding machine and other high-power industrial equipment. Key words：variable-speed pump；sub-