Abstract:Background: Modern EIT systems require simultaneously operating multiple functions for flexibility, interoperability, and clinical applicability. To implement versatile functions, expandable design and implementation tools are needed. On the other hand, it is necessary to develop an ASIC-based EIT system to maximize its performance. Since the ASIC design is expensive and unchangeable, we can use FPGAs as a prior step to the digital ASIC design and carefully classify which functions should be included in the ASIC. In this paper, we describe the details of the FPGA design adopted in the KHU Mark2.5 EIT system. Methods: We classified all functions of the KHU Mark2.5 EIT system into two categories. One is the control and processing of current injection and voltage measurement. The other includes the collection and management of the multi-channel data with timing controls for internal and external interconnections. We describe the implementation of these functions in two kinds of FPGAs called the impedance measurement module (IMM) FPGA and the intra-network controller FPGA. Results: We present functional and timing simulations of the key functions in the FPGAs. From phantom and animal imaging experiments, we show that multiple functions of the system are successfully implemented in the FPGAs. As examples, we demonstrate fast multi-frequency imaging and ECG-gated imaging. Conclusion: Given an analog design of a parallel EIT system, it is important to optimize its digital design to minimize systematic artifacts and maximize performance. This paper described technical details of the FPGA-based fully parallel EIT system called the KHU Mark2.5 with numerous functions needed for clinical applications. Two kinds of FPGAs described in this paper can be used as a basis for future EIT digital ASIC designs for better application-specific human interface as well as hardware performance.

High-performance efficient embedded systems for impedance spectroscopy: Challenges and potentials

Design of Multiple Indexes Impedance Biosensor System

A Programmable Low Power Current Source for Bioimpedance Measurement: Towards a Wearable Personalized Health Assistant.

A Fast Measuring Device for Impedance Spectrum of Lithium-Ion Battery Based on FPGA

Design of a Portable Bioelectrical Impedance Measurement System

Design, Development and Comparison of two Different Measurements Devices for Time-Resolved Determination of Phase Shifts of Bioimpedances

Impedance Spectroscopy Based on Linear System Identification

Methods and Systems for On-chip Spectrometry

Design and Implementation of a Cost‐Effective, Portable Impedance Analyzer Device with AD5941

Portable Bioelectrical Impedance Measurement System Based on Virtual Instrument

Single-point calibration process based integrated electrical impedance analyzer for multi-selective gas detection

Digital Fourier Transform Spectroscopy: a High-Performance, Scalable Technology for On-Chip Spectrum Analysis

Digital Impedance Emulator for Battery Measurement System Calibration

A low-cost approach to on-board electrochemical impedance spectroscopy for a lithium-ion battery

Improving FPGA Based Impedance Spectroscopy Measurement Equipment by Means of HLS Described Neural Networks to Apply Edge AI

Novel, compact electrochemical and impedance instrumentation

An Electronic Measurement Instrumentation of the Impedance of a Loaded Fuel Cell or Battery

A FPGA-Based Broadband EIT System for Complex Bioimpedance Measurements -- Design and Performance Estimation

Design and Experimental Validation of a SoC-FPGA-Based Compact NQR Spectrometer

An Effective and Robust Parameter Estimation Method in a Self-Developed, Ultra-Low Frequency Impedance Spectroscopy Technique for Large Impedances

Electrical impedance imaging system using FPGAs for flexibility and interoperability