Abstract:The upcoming BIOMASS mission will provide P-band repeat-pass PolInSAR data from space for the improved mapping of global biomass. PolInSAR technique has been widely validated with the potential to invert forest height and estimate forest aboveground biomass (AGB). However, the robustness of PolInSAR-based AGB estimation across different sites still lacks full evaluation, especially for those with a varied forest type, heterogeneity (varied growth ratio between cover and height), and topographic relief. In this study, we concentrated on backscatter decomposition and forest height inversion, and developed a robust AGB estimation method that can be applied to different sites. Two dense and closed tropical forest sites (Paracou and Nouragues) and one open and heterogeneous boreal forest site (Krycklan) were selected as the study areas, and the corresponding airborne PolInSAR, LiDAR, and ground measured AGB data were used for validation and analysis. Results show that ground backscatter has the strongest correlation with AGB in boreal forests, but this correlation cannot be transferred to the tropical forests. Only canopy volume backscatter is almost free from topographic influence, and its relationship with AGB across three sites can be formulated using one exponential equation, producing the best estimation accuracy, with R 2 of 0.79 and RMSE of 61.5 tons/ha (relative RMSE of 20.0 %). Multi-baseline PolInSAR retrieved forest height with little bias in spite of the presence of temporal decorrelation. One power equation can be used to correlate PolInSAR forest height with AGB across three different sites, and LOO (leave-one-out) validation shows the R 2 of 0.85 and RMSE of 51.8 tons/ha (relative RMSE of 16.9 %). However, the RVoG-inverted PolInSAR FH was found to mainly represent the top forest height for open and heterogeneous forests, which means PolInSAR FH (forest height) lacks consideration for forest horizontal structure (e.g. forest density). In contrast, volume backscatter better captured forest density, and the proposed AGB model that combines PolInSAR FH and volume backscatter further improved the AGB estimation accuracy, especially for open forests: the plot-scale validation from all three sites shows R 2 was improved from 0.79 (volume backscatter) and 0.85 (PolInSAR FH) to 0.89, and RMSE decreased from 61.5 and 51.8 to 45.2 (relative RMSE of 14.7 %) tons/ha; for region-scale validation, R 2 was improved from 0.77 and 0.83 to 0.89, and RMSE decreased from 64.2 (relative RMSE of 39.0 %) and 54.5 (34.5 %) to 48.1 (29.4 %) tons/ha.

Forest Aboveground Biomass Estimation Using Polarization Coherence Tomography and Polsar Segmentation

Forest Total and Component Above-Ground Biomass (AGB) Estimation through C- and L-band Polarimetric SAR Data

Forest Aboveground Biomass Estimation in Subtropical Mountain Areas Based on Improved Water Cloud Model and PolSAR Decomposition Using L-Band PolSAR Data

Forest AGB Estimation using L-Band Polarimetric SAR Features

Aboveground Biomass Retrieval in Tropical and Boreal Forests Using L-Band Airborne Polarimetric Observations

Forest Aboveground Biomass Estimation Using Multi-Features Extracted by Fitting Vertical Backscattered Power Profile of Tomographic SAR

Collaborative Estimation of Aboveground Forest Biomass Using P-Band and X-Band Interferometric Synthetic Aperture Radar Based on Feature Optimization

Relating ALOS-2 PALSAR-2 Parameters to Biomass and Structure of Temperate Broadleaf Hyrcanian Forests

Estimating Forest Above-Ground Biomass in Central Amazonia Using Polarimetric Attributes of ALOS/PALSAR Images

Improving the Potential of Coniferous Forest Aboveground Biomass Estimation by Integrating C- and L-Band SAR Data with Feature Selection and Non-Parametric Model

Exploring optimal combinations of multi-frequency polarimetric SAR observations to estimate forest above-ground biomass

Forest above-ground biomass estimation using X, C, L, and P band SAR polarimetric observations and different inversion models

Tropical forest AGB estimation based on structure parameters extracted by TomoSAR

Polarimetric Measures in Biomass Change Prediction Using ALOS-2 PALSAR-2 Data

Inversion of Forest above Ground Biomass in Mountainous Region Based on PolSAR Data after Terrain Correction: A Case Study from Saihanba, China

Forest Canopy Height Estimation Using Polarimetric Interferometric Synthetic Aperture Radar (PolInSAR) Technology Based on Full-Polarized ALOS/PALSAR Data

Forest Height Measurements Based on Polarimetric SAR Interferometry

Polarimetric ALOS PALSAR Time Series in Mapping Biomass of Boreal Forests

Improving the Estimation of Above Ground Biomass Using Dual Polarimetric PALSAR and ETM+ Data in the Hyrcanian Mountain Forest (Iran)

Estimating Aboveground Biomass of Broadleaf, Needleleaf, and Mixed Forests in Northeastern China Through Analysis of 25-M ALOS/PALSAR Mosaic Data

Improved forest biomass estimation based on P-band repeat-pass PolInSAR data across different forest sites