Abstract:The deionization process is increasingly recognized as a solution to global water shortages. This study aims to investigate the impact of various parameters on the deionization efficiency. Specifically, volume flow rates (F) were tested (1, 2.5, 5, 10, 15, and 20 ml min −1 ), solute concentrations (C) (200, 500, and 1000 mg l −1 ), temperatures (T) (50, 60, and 70°C), voltages (V) (10, 20, and 30 V), and pressures (P) (200, 400, and 800 Pa). In another experiment examined F (100, 250, and 500 mol l −1 m 2 ), V (0.1, 0.5, and 1 V), C (100, 200, 300, 400, and 500 moles m 3 ), and time durations (D) (16, 32, 48, 64, 80, and 96 min). These experiments aimed to determine the separation percentage of potassium chloride cations and anions and were based on data extracted from scientific articles. In the subsequent step, the ANFIS model with the FCM network creation method and the error backpropagation training algorithm was employed to evaluate the impact of each cell input on the separation percentage, output flux, and the separation percentage of potassium chloride cations and anions. This evaluation was conducted through 31 and 15 iterations, respectively. Based on the evaluation criteria, it was observed that the volume flow rate as the sole input yielded the highest prediction accuracy for the separation percentage and output flux. Additionally, the FCTVP model results indicated a slight reduction in the error criteria compared to the FCTV, FCT, FC, and single models. Consequently, it can be concluded that the cell pressure factor may play a decisive role, either reducing or increasing the separation process (R 2 = 0.93,MBE = −0.3, and RMSE = 6.4), as well as the output flux (R 2 = 0.85, MBE = 0.0003, and RMSE = 0.07). Furthermore, the statistical criteria values of the FVCT model for the separation percentage of potassium chloride cations and anions demonstrated a proper correlation (R 2 = 0.96 and 0.95), slight underestimation, and low error MBE = −0.57 and −1.2) (RMSE = 15.2 and 18.5, respectively).

Modeling the flux of volatile fatty acid in a membrane distillation with the effect of pH

Predicting the flux of various volatile fatty acids mixtures in a membrane distillation

Experiments and Kinetic Modeling of Fructose Dehydration to 5-Hydroxymethylfurfural with Hydrochloric Acid in Acetone-Water Solvent

Membrane electrolysis distillation for volatile fatty acids extraction from pH-neutral fermented wastewater

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Simultaneous Concentration and Detoxification of Lignocellulosic Hydrolyzates by Vacuum Membrane Distillation Coupled with Adsorption.

High-Efficiency Recovery of Acetic Acid from Water Using Electroactive Gas-Stripping Membranes

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Removal of Acetic Acid from Wastewater with Liquid Surfactant Membranes: An External Boundary Layer and Membrane Diffusion Controlled Model

Assessment of toxicity of volatile fatty acids to Photobacterium phosphoreum

Membrane distillation of wastewater: comparison of model and real organics

Optimization of Hydraulic Retention Time and Organic Loading Rate for Volatile Fatty Acid Production from Low Strength Wastewater in an Anaerobic Membrane Bioreactor.

Modeling of the Phase Behavior of Carboxylic Acid Systems Using the SAFT-VR Mie DBD Model: Application to the Simulation of the Acrylic Acid Production Process

Modeling of deionization of aqueous compounds using electrodialysis process (data collection for enhanced clarity)

Mass transfer modelling of hollow fiber membrane contactor for apple juice concentration using osmotic membrane distillation

Modeling of enhanced VFAs production from waste activated sludge by modified ADM1 with improved particle swarm optimization for parameters estimation

Simulating and Predicting the Flux Change of Reverse Osmosis Membranes over Time During Wastewater Reclamation Caused by Organic Fouling.

Simulation models of microbial community, pH, and volatile fatty acids of anaerobic digestion developed by machine learning

Investigation of Key Process Parameters in Acid Recovery for Diffusion Dialysis Using Novel (MDMH-QPPO) Anion Exchange Membranes

Volatile fatty acid production from mesophilic acidogenic fermentation of organic fraction of municipal solid waste and food waste under acidic and alkaline pH

Membrane fouling analysis of air-gap membrane distillation (AGMD) for recovery of water and removal of antibiotics from a model wastewater containing antibiotics and humic acid